What did u do to your raptor today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Canuck714

FRF Addict
Joined
Jun 11, 2012
Posts
1,204
Reaction score
1,010
Location
San Antonio TX
Full Race Radiator, fresh coolant and Motorcraft upper & lower radiator hoses this last weekend. Stock one developed a semi-random leak at the plastic tank, 203k miles seemed like a good time to swap the hoses as well. That lower clamp at the block was of course clocked at an impossible angle to get with any of my normal constant-tension clamp pliers (i.e. pliers or pliers at the "wide" pivot haha). Went to Autozone and got one of those cable-operated clamp pliers as I had seen used on redonKiLaus's detailed videos, they DID get the job done but just barely, they never would ratchet to the tightest setting but they did engage the clamp and get it loose enough to work the hose off. Radiator is beautiful, perfect fit and finish, wish you could see more of it when mounted haha!
View attachment 444544
Hey Ben, any extra capacity in the all aluminum rad? Cant really tell in the picture if the core is wider or if end tanks hold more.

Z
 

BenBB

FRF Supporting Member
Supporting Member
Joined
Apr 21, 2016
Posts
1,819
Reaction score
2,491
Location
Lots of different places
Hey Ben, any extra capacity in the all aluminum rad? Cant really tell in the picture if the core is wider or if end tanks hold more.

Z
Yes! Full Race doesn't really tell how much increased capacity (although that's probably more marketing hype than anything) but it does say it's a "42mm 2-row (compared to 22mm 1-row)" for the stocker. Here's a little better angle, eyeballing it does look like the core is about twice as thick...
IMG_6738.JPG
 

Canuck714

FRF Addict
Joined
Jun 11, 2012
Posts
1,204
Reaction score
1,010
Location
San Antonio TX
Yes! Full Race doesn't really tell how much increased capacity (although that's probably more marketing hype than anything) but it does say it's a "42mm 2-row (compared to 22mm 1-row)" for the stocker. Here's a little better angle, eyeballing it does look like the core is about twice as thick...
View attachment 444593
Yup...that angle is better.
Thanks
 
Top