What did u do to your raptor today?

[jdm_sixtwo]

Where? I am looking for a pair of rear too.

Just check Facebook marketplace. They’re pretty easy to find cheap.

 

[MEIRONMAN207]

How many miles? Mine looked like that at 125K.

157K miles….also goin to go ahead a do all the bearings and seals while it’s all apart now…still cheaper than a Currie! That I really want

 

[TomDirt]

Applied ceramic trim coat on my front inner fender liners. Now they match the pretty black of my bedliner coated rears. Highly recommend! photo is after the first coat and I realized I didn’t get full coverage. It’s now complete

Is it this stuff, the Cerakote brand?

 

[JefeAZ]

Went up to 8,500ft in the AZ Mountains to cut down Christmas trees. 37' Mickeys, Geiser Bros bottom perch on TSW bravo rebuilds. Stock leafs in the rear still, Alcans(stock lift) should be here in 2 weeks.

Geisers feel so much better on the street compared to stock but they blew me away on the highway at 75+. With no sway bar the stock springs got floaty and unsafe hitting dips at speed. That is completely gone with the Geisers. They brought the front end up 1.75" and I now have 8.5" of tire clearance up front. No fender mods whatsoever and no rubbing getting air last week. Need to test it out more though but I might actually get away with 37s and no trimming with how I use the truck

 

[JefeAZ]

Oh and after 200 hard miles in the mountains and flat roads at 85MPH, I get home to the IWE rattling on the drivers side. 4WD made it go away. Lines looks good so I took the valve off, blew thru it and put it back together and the rattling went away. Picked up a new vacuum valve just in case it comes back

 

[jdm_sixtwo]

Oh and after 200 hard miles in the mountains and flat roads at 85MPH, I get home to the IWE rattling on the drivers side. 4WD made it go away. Lines looks good so I took the valve off, blew thru it and put it back together and the rattling went away. Picked up a new vacuum valve just in case it comes back

Yeah, I don’t have the money to change those all the time with the way I run my truck so I just disconnected them about 10 months ago and no issues at all. Didn’t notice a loss in mpg.

 

[V1ROTATE]

Is it this stuff, the Cerakote brand?

That’s it

 

[TomDirt]

Was there enough Cera-goo in the box to do both front liners?

 

[Gryphon313]

Was there enough Cera-goo in the box to do both front liners?

Those Cerakote wipes go a long way.

 

[V1ROTATE]

Was there enough Cera-goo in the box to do both front liners?

That stuff goes a long way. I used one pad for each liner