onodelta
Member
Found the source of condensation and stink that's beginning to develop
View attachment Video Feb 14 2024, 5 38 56 PM (1).mov
View attachment Video Feb 14 2024, 5 38 56 PM (1).mov
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Behind the vertical rear seats, the cabin vent. One on each sideWhere is that located?
Found more water from a different area.Where is that located?
To me it looks like you found the source of the leak in your video, and that the water in your pics here is likely just condensation from the water that soaked the floor trying to escape when the truck is parked. I think you have one leak.Found more water from a different area.
Its not condensation, the top is leaking from the rear glass center window, the small one. Hosed it down today and it's slowly coming in from around there and leaking around. Happening on 2 2021 raptorsTo me it looks like you found the source of the leak in your video, and that the water in your pics here is likely just condensation from the water that soaked the floor trying to escape when the truck is parked. I think you have one leak.
I hope you can get this fixed.
The sliding glass window seal is designed to keep out rain water. Spraying it with a hose/high pressure water until it begins to bypass the seal is not a valid test. Are you doing the same with the body vents? You’re literally inducing a leak with your method of “testing”.Its not condensation, the top is leaking from the rear glass center window, the small one. Hosed it down today and it's slowly coming in from around there and leaking around. Happening on 2 2021 raptors
I was pouring water from above like it would when it's raining, not blasting it straight head on. The water trickled down.The sliding glass window seal is designed to keep out rain water. Spraying it with a hose/high pressure water until it begins to bypass the seal is not a valid test. Are you doing the same with the body vents? You’re literally inducing a leak with your method of “testing”.