VenomRex VR602

[la32]

Anyone have VenomRex VR602’s +12 with 35X12.5R17 on their 2nd gen. If so what tire and how has it effected your MPG from stock.

 

[Nibbl3s]

I have the 602s. I would go with the stock size. I just went through this getting a set of ridge grapplers. The 35s were .2 of an inch taller than the 315s but the 315s were wider. What really pushed me toward the 315s was the weight. The 35s are a full 5 pounds heavier than the stock size (within ridge grapplers

 

[la32]

Ya I put 35 Ridge Grapers on my stock ford bead locks and the my mpg went down 3mpg. This isn’t an economy vehicle but going from an average 16.5 to 13.5 hurts. Now I’m looking at putting the VR602s with 35 toyo ATIII’s. This would put me 10lbs lighter than the stock wheels/tires but push out the about 1”.

 

[Peterb]

general grabber x3 mt
heavy but I believe a heavier tire is tougher
true 35” height
a bit of howl but is great off road
approximately 7% fuel consumption penalty

 

[cubsalltheway]

602 on stock tires

 

[la32]

anyone running Toyo ATIII’s on their 2nd gen, if so what size and load rating? How does it ride? Im
About to put 35” ATIII’s on but I’m concerned with the E rated being to hard.

 

[Popper864]

Hey, @cubsalltheway you still running the VR602s? I too have a white screw, but I color matched my fenders. I'm stuck between coal black or the Grey/Tungsten. Any additional pics you can show me would be great. Also how's the offset?
Thx