Venomrex - All new 17" VR-602 Release

[HoldenTX]

wow!

I doubt it changed much, but since the stock wheels have been tweaked on the 19 it would be interesting to know if Ford added or reduced weight.

Sent from my SM-N950U using Tapatalk

 

[Raptor911]

I will be weighing everything when I install my 602s and I will post the results.

I doubt it changed much, but since the stock wheels have been tweaked on the 19 it would be interesting to know if Ford added or reduced weight.

Sent from my SM-N950U using Tapatalk

 

[FP Forged]

For anybody interested I'm working on a flush mount billet cap for the 601 and 602. I had a model 3D printed for test fit and found that the seat is a little different on each style. The 3d printed model sat flush on the 601 but not the 602 so we're gonna try a few things to make it work on both. If not we might just need 2 different caps. Here are a few pics of the 3d printed model on a 601. Don't mind the tape, I didn't realize how fragile plastic 3d printed objects were and the top broke off when I popped it in. This should give you an idea of what I'm going for. Once it's perfected I'll know the exact pricing and I'll set up a group buy. Custom engraving will be available as well.

 

[im33303]

For anybody interested I'm working on a flush mount billet cap for the 601 and 602. I had a model 3D printed for test fit and found that the seat is a little different on each style. The 3d printed model sat flush on the 601 but not the 602 so we're gonna try a few things to make it work on both. If not we might just need 2 different caps. Here are a few pics of the 3d printed model on a 601. Don't mind the tape, I didn't realize how fragile plastic 3d printed objects were and the top broke off when I popped it in. This should give you an idea of what I'm going for. Once it's perfected I'll know the exact pricing and I'll set up a group buy. Custom engraving will be available as well.

I would be very interested in a set or two for my 602.

Please let us know how it goes

 

[im33303]

602 with Red Inlays

 

[Raptor911]

I assume after you finalize fitment issues via the 3d printed models, you will make them from some metal?

For anybody interested I'm working on a flush mount billet cap for the 601 and 602. I had a model 3D printed for test fit and found that the seat is a little different on each style. The 3d printed model sat flush on the 601 but not the 602 so we're gonna try a few things to make it work on both. If not we might just need 2 different caps. Here are a few pics of the 3d printed model on a 601. Don't mind the tape, I didn't realize how fragile plastic 3d printed objects were and the top broke off when I popped it in. This should give you an idea of what I'm going for. Once it's perfected I'll know the exact pricing and I'll set up a group buy. Custom engraving will be available as well.
View attachment 116288 View attachment 116289

 

[Tx State]

For anybody interested I'm working on a flush mount billet cap for the 601 and 602. I had a model 3D printed for test fit and found that the seat is a little different on each style. The 3d printed model sat flush on the 601 but not the 602 so we're gonna try a few things to make it work on both. If not we might just need 2 different caps. Here are a few pics of the 3d printed model on a 601. Don't mind the tape, I didn't realize how fragile plastic 3d printed objects were and the top broke off when I popped it in. This should give you an idea of what I'm going for. Once it's perfected I'll know the exact pricing and I'll set up a group buy. Custom engraving will be available as well.
View attachment 116288 View attachment 116289

I am interested as well.

 

[FP Forged]

I assume after you finalize fitment issues via the 3d printed models, you will make them from some metal?

Correct, billet aluminum. I was hoping the 601 and 602 were the same since they use the same cap from Venom Rex. Since these need to sit flat they're probably going to have to be a little different for each wheel.

For anyone interested I'm guessing these will be between $200-$250 a set for raw. It's much harder to build a pop in cap out of billet opposed to just lathing a flat push thru cap like you see for the Method wheels.

I'll keep everyone posted on a group buy. Might be able save a little money that way.

 

[docskeet1]

I’m thinking about tungsten graphite VR-602’s on my lightning blue 2018. This thread has pics of lightning blue with coal black’s. Does anyone have pics with tungsten graphite’s on lightning blue?

 

[Nick@Apollo-Optics]

I’m thinking about tungsten graphite VR-602’s on my lightning blue 2018. This thread has pics of lightning blue with coal black’s. Does anyone have pics with tungsten graphite’s on lightning blue?

It's not Lightning Blue, but it is a blue on graphite setup.

https://www.flickr.com/photos/venomrex/albums/72157699867914791

Have you considered bronze? That's my favorite finish on the Lightning Blue trucks.