Upfitter switches request for help!

[Piranharaptor]

Ok I guess me is stupid... I am trying to hook up my RI hyperspot pillar lights. On the relay harness it showed black is ground, blue is switch output to relay and red input power. Do I just connect one of this to upfiter wire and then the others to the battery. Thanks

 

[GOTSVT?]

Red to battery, blue to up fitter.

 

[Piranharaptor]

I ran blue to upfiter blu/green. Main red to + and red/blk to -on battery Nothing. ?

 

[Piranharaptor]

Called RI. they said cut everything off. Run red to upfiter. Red/blk to frame. I'm still getting nothing. What am I missing. Thanks again

 

[Hamm3r]

Ignition has to be on for your upfitter to work. Make sure your switch is on.

 

[Piranharaptor]

Yeah truck is running. Just to be clear is there anything under dash that needs to be hooked up. The lights on the switches light up already of coarse. I hooked red to blue green upfitter and red/blk ground. No lights ???

 

[Ironhorse07]

Do the pass through wires need to be connected on the gen 2?

 

[Piranharaptor]

Do the pass through wires need to be connected on the gen 2?

I guess that's my question. I can't find em

 

[Kenny008]

If anyone has the wiring diagram for the upfitter switches, it would probably answer all these questions. I know I'm still confused about the pass-through wires back by the cab fuse box.
If I could see the upfitter switches, fuses/relays, and wiring, I'd be all set.
Anybody have the diagram to share?

 

[Piranharaptor]

Ok. I'm prob gonna save someone some time here. After a ton a calls today and everyone telling me the pass thru wire are hot I found this out. There are two sets of taped off wires under the hood 6 and 6 for a total of 12. I did not see the second set... Apparently you can connect the matching colors if you want to run something back inside the cab. I hooked up my pillars lights without wiring anything under the dash/glovebox.