Turbo issues when driving

[lando_l44]

Hey guys looking for direction and maybe you guys have had this problem. I have a gen 2 Raptor it’s a 2018 and today while driving i was starting to go up hill and the turbos kept trying to spool up then it would unspool then spool and unspool so gave it gas to help it shift. It stopped then put cruise control on still driving up the hill and it started doing it again and you could feel it with the cruise control on want to spool then stop.. never had an issue until now…i have extended warranty would this be something you guys recommend i take in to the dealer?

 

[Nex]

Yes.

 

[Macgyver1307]

Did you find out what happened? I might have the same issue. I don't have an extended warranty. I would never answer their call!

 

[lando_l44]

I took it in and they said everything was fine..i changed the air filter and couldn’t mimic the same problem..when was the last time you changed your air filter?

 

[DaveRhoden]

I have a new filter and have the same issue, but I just got mine last month. I’ll be cruising at highway speed and it sounds like someone is spraying the bottom side of the truck with a pressure washer.

 

[FordTechOne]

I have a new filter and have the same issue, but I just got mine last month. I’ll be cruising at highway speed and it sounds like someone is spraying the bottom side of the truck with a pressure washer.

That sounds like a boost leak. Check all of your charge air piping.

 

[DaveRhoden]

Thank you!

 

[Alaskan Assassin]

I am encountering a similar issue. Anytime I get a little aggressive with the gas, the turbos spool, hit the boost limit rapidly and in succession, and put the truck into limp mode. I usually have to pull over and restart, sometimes it clears itself. It has progressed from exclusively happening on an incline to simply taking off from a light. Anything over 10 PSI seems to trip it. 2019 Velociraptor 600. Also have an extended warranty, Appointment tomorrow. Anything further on this?