Tints

[MEATSWORD]

I have 50 on the windshield and 15 all around.
Big improvement during the day and still able to see at night.

And in Arizona you need all the help you can get....

 

[Nibbl3s]

I have 50 on the windshield and 15 all around.
Big improvement during the day and still able to see at night.

And in Arizona you need all the help you can get....

100% agree. I have 15 and 80% on the windshield. But OPs with 30 on the windshield and limo 5% all the way around is a disaster waiting to happen

 

[sixshooter_45]

Just did the top part of my windshield, sun visor.

 

[tooth]

This thread has me coming around on the windshield tint. I hate glare, and pretty much can't drive without sunglasses.

 

[fx4210]

I have Airi 80/90 on the windshield, 15 up front and 35 over the factory in back and I wouldn't go much darker than that.

30% on the front is just begging for a ticket or god forbid you get into a wreck.

 

[Hamma Time]

Air 80 on fronts and 50% on windshield keeps heat down and you can still see

 

[tacomoth]

What is stock in the back? If you want it even front and back, do you just go over it or remove and then do the same?

 

[Raptor911]

OEM back is 20% and the tint is via a dye in the glass so you can remove it.

What is stock in the back? If you want it even front and back, do you just go over it or remove and then do the same?

 

[borzraptor]

Been four months with 30% on the windshield and haven't been pulled over or gotten into any accidents. Don't have any issues with visibility at night or in dim lighting maybe because I'm a younger guy and have good vision lol. Also, backing up and parking isn't too bad. Just roll down the windows if you really need to or if you've got 802A, use your 360 cameras. To each their own with the tints. Personally I like my privacy and gives the truck a much cooler look. Not to mention how good it feels coming back to an interior that isn't baking after being left in the sun for pretty much all day.

 

[borzraptor]

What is stock in the back? If you want it even front and back, do you just go over it or remove and then do the same?

Guy at the shop told me my rears were about 20-25% and in order to match that with the 5% film I put in the front I'd have to add a 20% film on top of the rears. So basically the rear has 20% film on top of the stock 20-25% dyed glass which equals 5% in the rear.