Has anyone installed this yet? I'm wondering if you have to full drop the headliner to run the antenna cable or if it's relatively simple to snake over and down one of the pillars. I'm planning to install the radio in the console...anyone done that? Pics or video?
Yes, we have one installed on our shop truck. No, you do not need to drop the headliner in order to install the wiring. The cable can be fed through the back of the cab and down into headliner area. We used a small pry tool to pull the headliner down ever so slightly to snake the cable through. From there, ran it along the headliner, down the back corner of the cab and under the floor paneling. We cut a small hole in the bottom of the center console (we mounted our Icom radio in the center console with an aux speaker under the seat) and ran the antenna wire up through there.
Available for the Gen1 and Gen2 trucks:
Gen1 Link = https://fordraptorlights.com/products/third-brake-light-antenna-mount-2010-2014-ford-raptor
Gen2 Link = https://fordraptorlights.com/products/third-brake-light-antenna-mount-2017-ford-raptor