PorterW1111
FRF Addict
So im coming to a close on the build of this truck. before i start using it and falling in love with it i figure it best to put it out on the market and see what the potential is of selling it.
there has been more that i can list done to it but i will list the major components here. there is a build thread on the truck if you really want the detail.
-2012 screw with 95k miles
-jlt intake
-sct tune w/bdx tuner mounted
-icon 3.0 coilovers
-icon billet uppers
-icon zeta trible bypass rear
-icon progressive leaf pack
-rpg bump stop rear w/ fox air shocks
-rpg billet tie rods
-KHC lca slot delete
-4.88 Nitro axle gears
-advanced fiberglass +2+2 fenders
-advanced fiberglass +2+2 bedsides
-paint matched fiberglass and bedrails coated in bed liner
-front driver and pass side firewalls have been moved back by 3.5" and plated with 16ga steal, then fire proof barrier ( this is required when running 39" tires the truck has the ability to fully compress at full lock turning the 39" tires with no rubbing. )
-brand new 39" BFG KM3s
-17" icon rebound alloy wheels
-ronin short antenna
-frame cut prerunner front bumper
-frame cut prerunner rear bumper
-bbk varitune muffler and out through body bedside exit exhaust tip
Full chase truck bed setup (comes with all gear if wanted)
-bed supports
-bed mount swing out dual tire carrier
-3point tire tie down straps
-bed mount cooler holder
-bed mount 2 5gal fuel jug holders
-bed mount jack holder
-bed mount traction board
-bed mount 6 gal water jug holder
To be added before sale
-full bedmount chase rack/rollbar
-36" amber strobe rear
-2x 3" amber fog lights in front
-2x 11" amber led bars in front
there are some items i am still buttoning up and tuning in so the truck is not immediately ready at this moment. i will post the pics i have and will continue to update this thread with new pics when the truck gets completed.
per the requirements i have to list a price so i will say id be looking at 50K for the truck. this post is more about potential interest vs a pricetag.
truck is located near Orlando, FL
there has been more that i can list done to it but i will list the major components here. there is a build thread on the truck if you really want the detail.
-2012 screw with 95k miles
-jlt intake
-sct tune w/bdx tuner mounted
-icon 3.0 coilovers
-icon billet uppers
-icon zeta trible bypass rear
-icon progressive leaf pack
-rpg bump stop rear w/ fox air shocks
-rpg billet tie rods
-KHC lca slot delete
-4.88 Nitro axle gears
-advanced fiberglass +2+2 fenders
-advanced fiberglass +2+2 bedsides
-paint matched fiberglass and bedrails coated in bed liner
-front driver and pass side firewalls have been moved back by 3.5" and plated with 16ga steal, then fire proof barrier ( this is required when running 39" tires the truck has the ability to fully compress at full lock turning the 39" tires with no rubbing. )
-brand new 39" BFG KM3s
-17" icon rebound alloy wheels
-ronin short antenna
-frame cut prerunner front bumper
-frame cut prerunner rear bumper
-bbk varitune muffler and out through body bedside exit exhaust tip
Full chase truck bed setup (comes with all gear if wanted)
-bed supports
-bed mount swing out dual tire carrier
-3point tire tie down straps
-bed mount cooler holder
-bed mount 2 5gal fuel jug holders
-bed mount jack holder
-bed mount traction board
-bed mount 6 gal water jug holder
To be added before sale
-full bedmount chase rack/rollbar
-36" amber strobe rear
-2x 3" amber fog lights in front
-2x 11" amber led bars in front
there are some items i am still buttoning up and tuning in so the truck is not immediately ready at this moment. i will post the pics i have and will continue to update this thread with new pics when the truck gets completed.
per the requirements i have to list a price so i will say id be looking at 50K for the truck. this post is more about potential interest vs a pricetag.
truck is located near Orlando, FL
Last edited:
