SVCOFFROAD C.A.S. Coil Adjustment System

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Bark beetle

Full Access Member
Joined
Oct 29, 2016
Posts
135
Reaction score
151
Location
Northern NM
Blue because the shocks are blue. Wish the shocks and these were black, like the current aftermarket Fox stuff. They phased out blue a long time ago. I like sleepers. Great work.


Sent from my iPad using Tapatalk Pro
 

Raptizzle

FYT
Supporting Member
Joined
Jul 31, 2010
Posts
8,581
Reaction score
7,484
Location
Southern CA
Blue because the shocks are blue. Wish the shocks and these were black, like the current aftermarket Fox stuff. They phased out blue a long time ago. I like sleepers. Great work.


Sent from my iPad using Tapatalk Pro

Definitely agree that they should've come black from the factory.
 

noblesramair

Full Access Member
Joined
Jul 1, 2016
Posts
75
Reaction score
35
Just picked up a set also, need them asap as I have a set of larger rims/tires coming in! As for color I'd probably go with blue but if its black then that works also.
 

Mjparsons

Active Member
Joined
Mar 20, 2016
Posts
83
Reaction score
17
Location
Rancho Santa Margarita, CA
Would one of these systems (with or without modification) work with the Gen 1 stock shocks? It would be amazing to have more adjustability on the Gen1 shocks. I.e. adjusting the shocks to a level in between perch levels.


Sent from my iPhone using Tapatalk
 

Raven13

FRF Addict
Joined
Sep 30, 2014
Posts
2,262
Reaction score
3,261
Location
College Station, TX
Would one of these systems (with or without modification) work with the Gen 1 stock shocks? It would be amazing to have more adjustability on the Gen1 shocks. I.e. adjusting the shocks to a level in between perch levels.


Sent from my iPhone using Tapatalk
No but SVC may be working on one for gen1
 
OP
OP
svc

svc

Supporting Vendor
Supporting Vendor
Joined
Nov 8, 2011
Posts
1,636
Reaction score
3,412
Location
Worldwide
Hey everyone. We had our second prototype installed today. Total install took us about 1:15min total. This customer requested that we go even higher than Raptizzle front, so we added another .25" of preload and it definitely gets the front end of the truck up in the air.

Ride felt good on street, has a little more pop over speed bumps than Tizzles setup. Here are some pics for your reference.

On a side note, we have been overwhelmed with the amount of interest int the CAS System and have decided to extend the initial offer of $469.00 through April 15th.

Thanks everyone for the support. we really appreciate it.

Jarrett

Nick%201.5%20preload_zpsakcxhm4g.jpg

1.5%20preload%202_zpsnkshqkvi.jpg

1.5%20Wheelwell%20Pre-load_zpsmikwmkal.jpg
 
Top