Super simple red facing Amber install.

[LONGISLANDRAPTOR]

Hey guys.

Here is my install of 2 KC cyclone ambers for rear facing ambers.

I used INDUSTRIAL double side tape and secured them to my rear glass.

They will not move or rattle free. This tape is strong! Sometimes the simplest way to do something is beyond our habits of over complicating all solutions.

Sent from my iPhone using Tapatalk

 

[Ben0326]

I like it Mike, I'm guessing you ran the wire through the vent on the back of the cab?

 

[LONGISLANDRAPTOR]

Thanks man.

No I ran the wire out of the passenger front sill plate then down along the rocker and up the back of the bed.

I will try to get pictures soon. It is nice and clean and kept interior disassembly to a minimum lol.


Sent from my iPhone using Tapatalk

 

[richardhead84]

This is a really good idea. How bright are they at night? Ive wanting to get some ambers for night runs at TRR and this seems a lot easier and cheaper than flush mounts in the bumper.

 

[LONGISLANDRAPTOR]

These are 11,000 lumnes but they only reach 10 feet witch is perfect. Lots of guys run the cyclone for rear facing ambers.

Bumper lights are too low for ambers I have been told as well.

If anyone needs the tape I can supply the name an part number


Sent from my iPhone using Tapatalk

 

[Yukon Joe]

Nice job!
Be sure to clear the snow from your cover before the run, otherwise they would be covered up.


Buy a raffle ticket for Avery: win an awesome prize for your Raptor.
http://www.fordraptorforum.com/f195/november-pay-forward-event-38746/#post780993


Oh, and there is a nice rubber grommet under the plastic cab cover at the door sill. Easy for running a wire through.

 

[Rookie]

These are 11,000 lumnes but they only reach 10 feet witch is perfect. Lots of guys run the cyclone for rear facing ambers.

Bumper lights are too low for ambers I have been told as well.

If anyone needs the tape I can supply the name an part number


Sent from my iPhone using Tapatalk

11k lumens?! Holy hell did you get the back shelf ones? Lol

 

[BearLeeAsian]

I'll take a picture of where @IRONMAN installed mine.. 3rd brake light

And I have these mounted inside the bed angled up.

Btw IIRC , double sided tape will not last back there, if you run hard enough.

Sent from my iPhone using Tapatalk

 

[LONGISLANDRAPTOR]

This double sided tape will hold. What do you think your factory emblems are held on with on all new cars?


Sent from my iPhone using Tapatalk

 

[BearLeeAsian]

This double sided tape will hold. What do you think your factory emblems are held on with on all new cars?


Sent from my iPhone using Tapatalk

Well emblems are stuck onto metals, where that is on glass.

Also I said IIRC, because I THINK @IRONMAN tested out that option.

That's why he designed his own mounts. But maybe that's only for the 3rd brake light option. Anyways looks good. Hope you have a waterproof wiring.

Sent from my iPhone using Tapatalk