SPD HighFlow Turbo Adapters

[JustRaptor1]

Just wanted to see who has these. What are the advantages of getting these.


If anyone who has them can give a review that would be awesome!

 

[WillieFlo]

I have them, but can’t tell you how much of a “seat of the pants” difference they made, since I had them installed with the exhaust and intake at the dealership. However, I am very pleased with the performance of my Gen 2, and plan to do SPD downpipes to match up later this year. COBB tune coming after my warranty is up.
What I can tell you is leave OEM exhaust and do just SPD downpipes and turbo adapters instead.

 

[TXRaptor]

I have them, but I did it mostly for the sound. I also have a FlowMaster FlowFX muffler and my truck growls nicely under heavy acceleration. They do not really provide documented performance gains.

If you want cheap performance, add an MPT 93 PRX tune and your truck will wake up!

 

[Biggwrm]

I have them, but I did it mostly for the sound. I also have a FlowMaster FlowFX muffler and my truck growls nicely under heavy acceleration. They do not really provide documented performance gains.

If you want cheap performance, add an MPT 93 PRX tune and your truck will wake up!

ditto, same adapters and muffler. Sounds great to me, didnt feel a difference. If your doing yourself, have a torch.. You will need it to heat and loosen the turbo bolts.

 

[Booth9999]

Get the extractor tool also.

 

[JustRaptor1]

Thanks I spoke to them yesterday, they are also about to come out with an exhuast fot the raptor. They said it has a deep sound excited to see that in action, might wait for that

 

[magaraptor]

I did the speed adapters and down pipes with high flow cats I can tell no difference, I’m putting the freak o boost turbos on in couple weeks let ya know how that turns out

 

[TXRaptor]

I did the speed adapters and down pipes with high flow cats I can tell no difference, I’m putting the freak o boost turbos on in couple weeks let ya know how that turns out

You have a pointer to the turbos? Are they supposed to add power or just sound?

 

[magaraptor]

When I get them put on there and then get it tuned it’s probably gonna fall in 150 to 180 hp gain range

 

[jimmyjamm]

I installed the SPD flanges by themselves, then added S&B intake later. The SPDs along smooth out the low rpm throttle response and pulled harder from lower rpm, turbos definitely spooled faster producing less turbo lag. I was easily able to notice a difference by the seat of the pants. Once in stalled the S&B only notice a bit more throttle response. When I added Borla muffler back pipes it helped a little with smoother sound.