Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Well, I have the whole setup for it, but I've never touched mine other than rebuilds. I'm about 99% confident nitrogen doesn't go bad. Obviously gas/oil gets purged and refilled during rebuilds, but that's it. If you have issues I think you need a rebuild. Otherwise, send it.Well, I bought them used with about 10k miles on them. Before I slap them on I didn't know if it'd be smart to top them off.
Honestly, I'm new to this so I wasn't sure of the process. I just thought it sounded natural to take the old out and put fresh in. Dumb and dumber taught me, "out with bad air, in with the good."
So to answer your question about bleeding them, I plead ignorance. Ha
Thank you for answering my question though. $30 a shock seemed high to me as well.
You shouldn't have to recharge them. If you do, they are leaking, and I'd suspect you need a rebuild.
I have a nitrogen setup for my rock crawler - same setup you'd use for the Raptor shocks. $30 each seems like a mighty fine profit for someone since airing up all four shocks would probably taking me a couple minutes. $120 for all four, or just invest a couple hundred in your own nitrogen setup... I'd just buy the setup.
But hey, if anyone around Denver wants to pay me $120 to air up their shocks, I'm in!
Why would you want to bleed them before refilling?
You need schraders first off. then get a Guage https://forged-offroad.com/product/...ford-raptor-fox-oe-2-5-shocks/?v=f24485ae434aIm also new to the whole rebuilding shocks vs just buying the ol $100 replacements lol.
What nitrogen setup do you have and are there any special tools needed for a diy guy ?