Here are the latest updates
Dash bar is tucked up in there perfect and stitch welded along the body. We didn't need to trim one ounce of the heater core so the defrost should work perfect.
A pillar down tube stitched to the body for added support.
We had to trim about 10-20% of the material on the parking brake, but is bolts right back in.
Radiused A-pillar welded to the cab
Corey's dad stopped by to reconstruct the passenger side core support. It is now ready for glass and hood
B Pillar radiused tube stitched to the OE roll over structure for added support on both sides. The rear tube is stitched to the cab as well.
Floor Jack mount
Top tubes X'd and ready to be welded after we plate and seal the cab above the window.
---------- Post added at 08:55 PM ---------- Previous post was at 08:51 PM ----------
Just think of this experience as future product development...
-Greg (aka squatting dog)
Corey is gonna draw the cage in the computer so we can have all the tubes CNC bent and notched to cut down on time and cost. For those who are interested we can do this exact same cage and add even more bracing if the customer desires.
