SE style beauty rings on Ford beadlock wheels

[GMAN62465]

I undid the first one with a nice tight Torx bit by hand and then did the rest with my Dewalt impact gun...

When putting them back in I threaded them on by hand at first and then seeded them fully with the impact gun

I also added some rubber o-rings to be a spacer between the bolt and the trim ring itself as to not cause any damage or marring of the surface of the trim ring.

GMAN

 

[Yukon Joe]

Yeah, definitely seems worth the money for those who want the "special edition" color. Looks like a dead on match. Thanks for sharing with with us @boarder1995. I will probably be in touch with them and/or you very soon. Thanks too for the offer that I could ship the rings to you!

Just a stupid side question, the other day I started to try to take the beauty ring off with just a little Allen wrench I had. They seemed super tight and didn't want to damage anything so I just stopped. But when I do take them off, do I need to be careful of anything or just go for it and put some pressure into it?

As Rick said, a T45 torx bit and a 3/8" ratchet or braker bar. Be genital you don't want to strip out the head.

Thank You for your donations to Avery. We hit our goal!

Yukon Joe
Snoball 3
Delta Lead
www.runraptorrun.com

 

[LekRap]

@RDFTS @GMAN62465 @Yukon Joe Thanks for all the guidance! That's wat I love about this forum. Ask a question and get 3 guys quickly helping out! I appreciate the help and hope to be able to pay it forward to others.

 

[boarder1995]

Take your time rethreading the bolts back in for sure. Steel bolts into aluminum is a recipe for stripping or cross threading threads if done hastily.
I'll still have to look for the color codes. I know someone listed them on HARO Facebook page.
They seem to be a pretty good match to my gender flares. I haven't closely parked next to an SE Raptor for direct comparison. Since I've had them painted I've gotten several compliments on the setup. Thanks for the positive remarks from y'all too.

 

[Danactive]

PM sent lookin good btw!

 

[Texag0842]

If anyone needs the color codes, ect feel free to PM me.

He has my original powder at the shop though for anyone who is sending him the rings.

 

[Deleted member 12951]

Can't you just post the color codes, why is a PM needed for that?

 

[Bulletnjm]

Damn they look good

 

[Danactive]

Damn those look good up close. I think he's trying to have respect for the original powder coater as to not have other companies just use their paint code... PM is more respectable I guess you could say. With that being said I have PM'd you requesting the paint code

 

[Deleted member 12951]

I am merely asking what the FACTORY paint code for the rings would be, that should not be a secret.