Scuff or light scratch on Fender

[Mike T]

You might not get those completely out, but if you work on them they will be MUCH less noticeable, I would try by hand first before you go to a buffer that close to the edge. If you're good with a buffer probably not an issue. I'm not..... I've taken a lot of little stuff out by hand.

 

[Oldfart]

Well here are 2 more on the back left fender as well. Guess I tapped both trash cans as there was on both sides of the alley

Suuuure, you bumped some "cans". We have the video buddy!!!!!!!

 

[OEMPlus Raptor]

You machine polish them off but you’ll need to do most of the flare. Otherwise you’ll create a shiny spot.

 

[mprice1234]

Forget about It! No one but you will notice it, if you take the time and try to fix it could turn out worse. If you do fix it soon after you will find more if you drive your Raptor like a Raptor.

 

[fordrat]

Well I’m glad this information is available because, the city just re-paved the road and when I went to wash my truck I found this shit. I was able to get it off but in doing so I scuffed the ceramic coating I didn’t find out until a week later that turtle wax has a bug and tar remover so I’m going to try to buff out the scuff marks and see what happens

 

[jeanco]

repainted

 

[fordrat]

Well I buffed out the scuffs pretty much with no problems here’s the results before and after

 

[fordrat]

Here’s what I used

 

[BaseModelRaptor]

Well I’m glad this information is available because, the city just re-paved the road and when I went to wash my truck I found this shit. I was able to get it off but in doing so I scuffed the ceramic coating I didn’t find out until a week later that turtle wax has a bug and tar remover so I’m going to try to buff out the scuff marks and see what happens

Next time use Tarminator. Spray and wipe away.