white / white brown (white is positive drivers side)
white violet /white orange (white violet is positive passenger side)
GEN 1 SCabs with Sony - Replacing Sub
- Thread starter JefeAZ
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
white violet /white orange (white violet is positive passenger side)
jgwoody
Active Member
Same as regular f150. Thanks!
jgwoody
Active Member
It looks like its spliced into came the old subwoofer harness.
jgwoody
Active Member
It looks like it’s spliced into the old subwoofer harness
Attachments
that signal is most affected by the oem eq curve
what year truck do you have? this might help you.
Your Raptors Audio System
i am going to try to explain why our audio system in our trucks sound so bad. hopefully this will give you all some insight as to how it works. if you can all be so kind as to not post in here until i finish adding the pictures and posts, i would appreciate it. that way it can be available...
www.fordraptorforum.com
jp4lsu
Active Member
Bumping an old thread.
Replacing the stock Sony sub with one of powered subs suggested in this thread. What is the proper way to wire it up?
In jgwoody's picture, it is using the stock harness, but it looks like there are other wires coming from somewhere else.
Finally upgraded! See here: https://www.fordraptorforum.com/thr...our-raptor-today.25089/page-2666#post-1865305
My installer can build more of these boxes if you want to go the same route
My installer can build more of these boxes if you want to go the same route
@The Car Stereo Company Ok, reviving this thread. I still have hopes of more underseat space with the “relocation” of the factory sub but I think this is the last option before I try something like @JefeAZ did. Any thoughts on if this
www.crutchfield.com
With a dedicated amp, would fit behind the 1/3 seat with the paneling removed and Dynamat installed on the back of the cab (rear facing sub). It looks to be tight but still doable. I have an existing.
I have a DU-HA underseat storage that accommodates the Sony sub that would have to be cut up if I went with a sub under the seat, but maybe at least bolt the cut end to the sub to keep it from flapping around.
Alpine SS-SB10
S-Series shallow sealed downward-firing enclosure with 10" 2-ohm subwoofer
www.crutchfield.com
I have a DU-HA underseat storage that accommodates the Sony sub that would have to be cut up if I went with a sub under the seat, but maybe at least bolt the cut end to the sub to keep it from flapping around.
not sure it will fit. i know it will fit wuth the seat down, but try to fold it up and you might have problems. try a piece of wood the same height as the amp and see if it folds up
Similar threads
