Rigid Fog lights

[Specialtyperformanceparts]

I will remove the stock light assemblies, sell them, and go with a high quality mount/BD set up like my 2019.

We expect our prototype truck to be delivered in the next week or so, and we will begin working on QUALITY replacement kits. As far as the ones you take out... we are working on a possible repurpose program so they aren't a total throw out.
The point is to give folks the option to get what they want and the level of performance they want.

John
SPVparts
info @spvparts.com
317-93-GOSPV

 

[Specialtyperformanceparts]

We expect our prototype truck to be delivered in the next week or so, and we will begin working on QUALITY replacement kits with Baja, Rigid and Diode Dynamics. As far as the ones you take out... we are working on a possible repurpose program so they aren't a total throw out.
The point is to give folks the option to get what they want and the level of performance they want.

John
SPVparts
info @spvparts.com
317-93-GOSPV

 

[Pure_mitt]

Does anyone know if there are (4) total Fogs, or just (2) with covers for additional?

4 total. 2 have removable covers. 2 of the fog lights work off the fog light switch and the other 2 off Auxiliary #1 switch.

 

[Pure_mitt]

 

[4x4TruckLEDs.com]

The 2 without covers are the SAE ones. The other 2 are required to have covers so that Ford can legally sell them with them installed already.

We're expected to have the Gen3 Raptor in our shop near the end of the month I think so we'll be playing with some ideas on replacing what is there and/or adding them on if you don't have any.

 

[Raptorlaw]

The 2 without covers are the SAE ones. The other 2 are required to have covers so that Ford can legally sell them with them installed already.

We're expected to have the Gen3 Raptor in our shop near the end of the month I think so we'll be playing with some ideas on replacing what is there and/or adding them on if you don't have any.

They are actually all SAE. As far as I can tell, same light output, just slightly different factory aim.

 

[4x4TruckLEDs.com]

They are actually all SAE. As far as I can tell, same light output, just slightly different factory aim.

Well those are the SR-M Series, right? There is only one SR-M that is SAE compliant, the on that is not covered. The other SR-M light has a non-SAE pattern, thus the cover.

 

[melvimbe]

Just a thought, but if we anticipate that many people will wish to take these fog lights off, a kit to reuse the lights elsewhere (maybe as A-pillar or reverse) might be useful. Not sure if these would work well in other locations.

 

[4x4TruckLEDs.com]

Indeed. Reverse would be good. Patience though... these trucks are barely on the streets yet so you'll see stuff from the main players (us, SPV, etc...) once we get our hands on the trucks and can start taking things apart and seeing what they changed.

I'm hoping they kept a lot the same from a 2021 F150, but we shall see.

 

[melvimbe]

Indeed. Reverse would be good. Patience though... these trucks are barely on the streets yet so you'll see stuff from the main players (us, SPV, etc...) once we get our hands on the trucks and can start taking things apart and seeing what they changed.

I'm hoping they kept a lot the same from a 2021 F150, but we shall see.

I'm in no hurry, don't even have plans to get a Gen 3 at the moment. I was just thinking outloud.