Regarding the bent frame issue

[6.2]

rangers dont bend frames bro

shoulda got a ranger

 

[Madcowranch]

Forget about the frame bending...has anyone else noticed the rust on the rear license plate bolts? I would expect more from a $50k dollar truck! ;-)

No worries man. RPG's coming out with 2.5 license plate bolts that'll fix that weakness.

 

[imdubious]

Sweeeeeeet!


Sent from my iPhone using Tapatalk

 

[Captain Awesome]

No worries man. RPG's coming out with 2.5 license plate bolts that'll fix that weakness.

Added to mod list.

 

[BramageDained]

I thought this subject was covered extensively in the past. And, based on what I've seen, it doesn't seem to be an issue anymore.

At little sahara I bottomed out the rear hard enough on my 2013(which has a reinforced frame from Ford) that there is a very slight crease across the bed at the edge of one of the mounts. Presumably from the weight of the tire/bubbarope/shackles/hitch/shovel that I had strapped down to the bed with ratchet straps(I have d-rings on the bed bolts).

Fame didn't bend.

 

[Icecobra]

What the hell you can bend the frame on a Raptor, how come nobody has posted about this before...

 

[dataustin]

I can't wait for those bolts come on-line! Now that we are talking serious flaws with the design of the truck, has anyone else noticed how, when not in use, the passenger seat belt twists just enough to rub on the side of the pillar making a rubbing noise....drives me crazy! ;-)

 

[Ni9mm]

I was banging a fat chick on the "tailgate" , didn't bend the frame but I blew out a shock and both nuts.

Steppin up to 3.0's

 

[wanderfalk]

the design flaw there is

I was banging a fat chick on the "tailgate" , didn't bend the frame but I blew out a shock and both nuts.

Steppin up to 3.0's

between the top of the bed and tailgate.

---------- Post added at 08:55 PM ---------- Previous post was at 08:53 PM ----------

I can't wait for those bolts come on-line! Now that we are talking serious flaws with the design of the truck, has anyone else noticed how, when not in use, the passenger seat belt twists just enough to rub on the side of the pillar making a rubbing noise....drives me crazy! ;-)

fasten the seat belt when no passenger is present.

---------- Post added at 08:59 PM ---------- Previous post was at 08:55 PM ----------

sit on it when i am photoing and jumping in out of the truck to shut the buzzer off. that is the nanny that will not shut up.

 

[Truckzor]

I hear there better. You dont have to worry about the frame. The trans will go out before you get going that fast


Sent from my iPhone using Tapatalk

LOL!