Rear Wheel Well Liners?

[ZaneMasterX]

Getting Line-X in the bed, but the Line-X dealer wanted $400 to do the wheel wells- said there was a lot of "prep". I've painted vehicles before, and I don't see it worth $400 when they're already doing the bed so I said no. I'll coat them myself and spend that on other upgrades.

Get some Upol Raptor Liner.

 

[CFIT]

Getting Line-X in the bed, but the Line-X dealer wanted $400 to do the wheel wells- said there was a lot of "prep". I've painted vehicles before, and I don't see it worth $400 when they're already doing the bed so I said no. I'll coat them myself and spend that on other upgrades.

$400 is insane. My local LineX dealer quoted me $95 for the wheel wells if I was doing them at the same time as the bed liner, and $195 if I was doing them at another time. The difference in price was just due to the additional masking involved if they weren't already spraying the bed liner as well.


Sent from my iPhone using Tapatalk

 

[TAURUS]

Does anyone have a Line-x dealer in N. Illinois/Chicago that they have used to do their rear wheel wells? And if so, what did they charge.

 

[rms8]

Does anyone have a Line-x dealer in N. Illinois/Chicago that they have used to do their rear wheel wells? And if so, what did they charge.

I spoke with Penny at :

Line-X of greater IL
1210 East State Street
Sycamore, IL 60178

815-991-2222
M-F 8-5

She quoted me $150 ($75 each side)

 

[1phatstang]

Did the Rustoleum rattle-can to mine over the week-end. Biggest PITA is the masking, but not that difficult. A little bit of quality prep work goes a long way. Total cost - 15.00. No regrets.

 

[Huck]

Linex in shorewood Illinois quoted me $200 a wheel when they do they bed. Sorry F that.


Sent from my iPhone using Tapatalk

 

[dillard09]

Did the Rustoleum rattle-can to mine over the week-end. Biggest PITA is the masking, but not that difficult. A little bit of quality prep work goes a long way. Total cost - 15.00. No regrets.

Got any pictures?

 

[Jetsco]

Does anyone have a Line-x dealer in N. Illinois/Chicago that they have used to do their rear wheel wells? And if so, what did they charge.

Had mine done at:

Great Lakes Linex
2510 State Route 176
Unit K
Crystal Lake, IL 60014
*+1 (815) 455-0123‬

$250 for both wells as I did not have the bed done and they did a great job!

 

[1phatstang]

Got any pictures?

Rustoleum aerosol undercoating, used 1 can per wheel well, removed wheel/tire. Thorough wash/dry, mask, spray. Very light texture (nothing like most spray-in bed liners). Would call it a matte black finish, not glossy (like some bed liners).
Trying to draw attention AWAY from the wheel wells, not TOWARD them. Helps the FOX shocks stand out better as well.

 

[Robtor310]

That looks pretty damn good. I didnt even think about using rubberized undercoating. Ive been using this on older cars and various things for years.