GEN 2 Rear Park Aid Volume adjustment?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Highpox1

Member
Joined
Feb 1, 2019
Posts
25
Reaction score
9
Location
Houston
(2019) Is there a way to tone down the volume level of the rear park aid beeper? That dang this is LOUD. If I am trying to back into a tighter space, such that it takes a minute, it gets very annoying, especially if there are folks in the back seat. They have all complained it's too loud. Yes I could shut it off using the steering wheel controls, but wanted to see if there is a way to lower the volume. If I knew where the speaker was, I could add insulation over the unit...thx.
 

EricM

FRF Addict
Joined
May 11, 2016
Posts
3,555
Reaction score
3,310
Location
OHIO
Not 100% sure on the Gen 2 trucks, but it's most likely fed into the audio system over the CAN bus, then played right through the speakers. It pretty much has to be part of that system to be able to lower the audio level when it activates. Unless it's accessible through Forscan, it's probably a fixed level as well. Just use the steering wheel control and turn it off, you know there's something back there once it activates- you really don't need to hear 100 more beeps as you get closer to it.
 

goblues38

FRF Addict
Joined
Oct 27, 2018
Posts
2,698
Reaction score
3,994
Location
STL
well...with an aftermarket stereo and the NAV TV unit...you can configure what volume and what speaker alerts play from.
 

Spectragod

Full Access Member
Joined
Mar 16, 2019
Posts
802
Reaction score
1,889
Location
Dayton Ohio

MEATSWORD

Full Access Member
Joined
Mar 23, 2019
Posts
398
Reaction score
181
Location
Arizona
I'll have to dig my notes out and go through them, I did it on both my '15 and my '18 raptor.
Thanks!

I looked at the spreadsheet again and found something that looked promising but don't want to brick the truck or double the volume by accident lol
 
Top