GEN 2 Really need help with rear seat heater.

[Szabo Mihaly]

I brough my 19 Raptor endo of 2019 brand new. The rear seat heater never worked. I was asking some help here but .... and then i forget during the summer. The winter is back and i wish the rear seats heater to work for my family. I have no chance to get help from Ford, i am in Romania. I checked with forscan but no error code was on. The buttons are there, wires on rear seat are there but if i press the button nothing is happening. I suspect is disabled in forscan but i don't know the module and the numbers. I checked the list i find in forscan forum but no result for me.
What should i check or what should i do?

Sent from my SM-N975F using Tapatalk

 

[JefferyGT]

Hello. Have you checked fuse?

 

[CoronaRaptor]

Does the button light up?

 

[Szabo Mihaly]

I have checked the fuses and the button did not light up if i press.
Thats why i think i need to enable in forscan but i don't know how.

Sent from my SM-N975F using Tapatalk

 

[CoronaRaptor]

I have checked the fuses and the button did not light up if i press.
Thats why i think i need to enable in forscan but i don't know how.

Sent from my SM-N975F using Tapatalk

Did you check that the heater is actually plugged in? I don't know much about forscan but can't image it would be intentionally forced off. Hopefully somebody can help you out.

 

[JefferyGT]

Could be a faulty switch. It is usually something simple.
Not always. But more than half the time.

 

[sixshooter_45]

Pull the switch out and ohm it with a meter.

 

[REX111]

Remove the back panel of the center console and make sure the switch is plugged in. Mine didn't work and the problem was that it was not plugged in.

 

[Szabo Mihaly]

I will check all your suggestions and will report. Thanks.

Sent from my SM-N975F using Tapatalk

 

[Szabo Mihaly]

I just checked everything visually possible. Connector are ok, fuses also ok. The ambient light on the rear heater switch are on, but the small led are not coming on if i press.
It is not possible in forscan to be a problem?
How i find out what is the correct cod and what module i should check.
On the forscan table in the forum. I cant find the rear seat comand. Can you help me what to check?


Sent from my SM-N975F using Tapatalk