RDFTS - 2020 GEN2 Build

[Deleted member 12951]

After purchasing my 2020 GEN2 and keeping my built GEN1, I was seriously deciding to keep my GEN2 stock and use my GEN1 as my off-road toy. Well after two months and still less than 400 miles on the odometer I gave in and couldn't hold myself back on modding this and eventually selling my GEN1. I have 3 off-road runs scheduled with my GEN1 and then I will most likely start parting it out or find a buyer who likes it as is.

So far on my GEN2, I've installed the following:

• Stubby Antenna
• Blackvue DR-900S 2 Channel
• ****** 360C hard wired
• Three Element Fire Extinguishers
• Truxedo Sentry CT tonneau cover

(not big deal stuff really, LOL)

Now for the fun stuff:
Its been ordered and waiting on delivery

• RPG Stage 3 with FOX 2.0x2.45 IFP Bumps with anodized Orange rings (adjustable bump stop)
• - Deavers +4HD
• RPG +2" Billet Shackles in Orange
• RPG Recovery Rack with SS caps - Holds two tires upright
• - 3 Ton Pro Eagle Big Wheel jack
• - 3 Ton Pro Eagle Big Wheel mount
• - 5 gallon gas jug
• - Y-straps for the tires
• RPG Bed Support with SS caps
• DID Interface (incase the Live Shocks get damaged)
• RPG Prerunner Bumper
• - tabbed for 6 Baja Designs LP6's
• - Baja Designs 40" OnX6 Racer Arc (moving from my GEN1) amber
• - Baja Designs Squadron Pros (side lighting)
• - Full Length skid plate with RPG cutoff for IC
• Pedal Commander
• GJ Motorsports 3rd brake light with antenna mount
• - Baja Designs S2 Sports Amber Combo
• - Baja Designs S2 Sports Work Scene white

Future Upgrades planned:

• Front Fox Factory Race Series 3.0 Live Valve Internal Bypass Coilover
• Rear Fox Factory Race Series 3.0 Live Valve Internal Bypass Piggyback
• Hood mounted Baja Designs XL80's (moving over from my GEN1)
• VHF Radio - debating about moving over my ICOM F5021 or something new
• Lowrance GPS - debating about moving over my Trophy 5M Baja
• Built Right bedside racks and dashmount
• Method Trail Series 701's wheels - bronze (moving over from my GEN1)

Pictures coming as I start modding this thing.
I do plan on taking it to TRR 2020 along with my GEN1 to first see how it runs TRR in stock form. I have a feeling that I am going to damage the factory bumper by the time the weekend is over. LOL.

 

[LF LandShark 2818]

Congrats and i look forward to following this build. Your Gen1 build was awesome to watch and im sure this one will be just as good, if not better!

 

[Marcus85]

What happened to convert you?

 

[EmbDriver]

He ain't converted...he still got the gen 1

 

[Deleted member 12951]

What happened to convert you?

Covid and stuck home being bored

 

[Deleted member 12951]

What's a DID interface? Live valve delete?

Don’t want to go into any type of limp mode with those wires on the shocks when off-roading. Just going to keep in the console for peace of mind and to help someone else on the run if needed

https://www.rpgoffroad.com/product/2019-up-raptor-live-valve-bypass-did/

 

[Neil Casa]

Where did you hardwire the radar detector power to?
Thank you ,
Neil

 

[sixshooter_45]

Don’t want to go into any type of limp mode with those wires on the shocks when off-roading. Just going to keep in the console for peace of mind and to help someone else on the run if needed

https://www.rpgoffroad.com/product/2019-up-raptor-live-valve-bypass-did/

There was a recent thread on why this isn't really needed and how the advertising of this device was misleading.

Sorry I meant to save the link.

 

[Deleted member 12951]

Where did you hardwire the radar detector power to?
Thank you ,
Neil

The fuse box down by the floorboard on the passenger side, Fuse 37 it shows in the manual that it is not used but it has power going through it and turns off when you turn off the truck. Its a 20amp fuse and I used an add-a-fuse tap with a 5amp fuse to connect the radar and blackvue dashcam to it.

 

[BenBB]

Sub’d, can’t wait to see pics of progress!