Raptor Power Steering Pressures

[RaptorBri]

Maybe the admins can post this information as a sticky as it seems very difficult to find this information.

With some of the Raptor Power Steering upgrades being launched, a number of my customers were wanting to know the stock pressure of the PS pump.

3 gal/min flow @145 psi at 1500 rpm, 1.6 gal/min flow @ 725 psi at 500 rpm. Relief bypass pressure in the pump is set between 1400 - 1520 psi.

 

[Yukon Joe]

It's the first time I've seen it posted.

Yukon Joe

 

[RaptorBri]

PS Rack Bolt Torque

When Replacing or removing the PS Rack bolts for the Raptor, Ford recommends replacing the bolts with new ones.

Bolt Part # W713954

Torque Bolts to 325 lbft.

 

[ARMADILLO]

Why can't you put all the power steering equipment off of a F350

 

[gtxracer]

Do you have any data for 5000rpm? Max GPM? Max Pressure? I see Lee has a TC pump replacement but a CB pump would flow much better at idle for parking lots and especially in sand/gravel where the traction is high. I went from a TC to CB in my Jeep and it was a huge difference. FWIW the TC pump was from PSC and the CB from Lee.