Pro Eagle Bed Mounting

[fordraptorfun]

Can anyone post pics of how they secure a Pro Eagle 2-ton Beast Jack in the the bed of their truck? I have this JDS mount but not a big fan of it since it's only mounted in 2 points and it rattles really badly while off-roading. I know JDS has a new design that mounts it in the bed towards the front of the truck, but that looks like it will rattle the same.

Looking to secure in the bed without drilling holes in the Aluminum bed. I don't want to have to buy a bed rack just to secure this thing.

And no....i'm not going to strap it to the Builtright Bedside Rack System. That Molle panel will not support the weight of this 60 lb jack.

Thanks in advance.

 

[Nex]

KHC makes a mount using factory bolt hole locations.

Bolt In Pro Eagle Jack Mount 17-Current Raptor, 15-current F150

Fitment: 17-Current Raptor, 15-current F150 THIS MOUNT EASILY BOLTS INTO A GEN 2 RAPTOR BED USING THE FACTORY BED BOLTS. ITS DESIGNED TO HOLD A PRO EAGLE JACK (NON BIG WHEEL) AVAILABLE IN DRIVERS AND PASSENGER SIDE MOUNT (PASSENGER SIDE SHOWN) JACK OPTIONAL OPTIONAL BOLT IN JACK HANDLE MOUNT...

khcoap.com

I have a bypass rack with mine, so no help for you there.

 

[NateMob]

KHC makes a mount using factory bolt hole locations.

Bolt In Pro Eagle Jack Mount 17-Current Raptor, 15-current F150

Fitment: 17-Current Raptor, 15-current F150 THIS MOUNT EASILY BOLTS INTO A GEN 2 RAPTOR BED USING THE FACTORY BED BOLTS. ITS DESIGNED TO HOLD A PRO EAGLE JACK (NON BIG WHEEL) AVAILABLE IN DRIVERS AND PASSENGER SIDE MOUNT (PASSENGER SIDE SHOWN) JACK OPTIONAL OPTIONAL BOLT IN JACK HANDLE MOUNT...

khcoap.com

I have a bypass rack with mine, so no help for you there.

This looks similar but beefier to the often broken JDS mounts. The only problem i see it that it only works for the small wheeled jacks. Most everyone is going to the big wheel versions now.

 

[Nex]

Can always use the pro eagle mount, make your own bracket out of 3/8" steel and bolt to the bed bolts.

 

[JAWSRaptor]

For those using the factory bed bolts, were the bolts easy to remove?

 

[Sunchild714]

My 2 Ton is mounted to my rack. You can see I had a mount welded to the rack then bolted the Pro Eagle Mount. It's strapped down and locked

 

[Nex]

For those using the factory bed bolts, were the bolts easy to remove?

Depends. They are a 1 time use bolt which likes to rust in place.

 

[peavey02]

For those using the factory bed bolts, were the bolts easy to remove?

They are pretty easy to remove. I've had mine out more than once and I've replaced them more than once. You just have to make sure you have a Torx Plus 50 (TP50). It will make it a lot easier.

 

[OEMPlus Raptor]

I have the JDS mount as well, it's not that great but I'll admit my jack hasn't moved while out on the trail.

 

[fordraptorfun]

This is how much I’d rather not drill into the bed or buy a whole bed rack system. @JDS….make these spacer blocks look pretty to improve your plate design. 3D print them to fit nicely with the grooves of the bed floor.

Good ol’ blocks of 2x4 for now.