PorterW1111's "Burro" build up

[CoronaRaptor]

Checking out my build…View attachment 185294

Maybe you can give @PorterW1111 a hand with his, since yours is all built

 

[MEIRONMAN207]

Maybe you can give @PorterW1111 a hand with his, since yours is all built

I offered already.

 

[PorterW1111]

Hitting builders block these days. So many things to do, not sure which one to start on. I figured I’d work on my tig skills and knock out these strap tie down points for the spare tires.

 

[K223]

Start on the bottom of the frame and work your way up! By the time you get to glassing it will be a cake walk lmao

 

[PorterW1111]

Ooo fancy...alright fiberwerx let’s gets that dash sent on out lol

 

[PorterW1111]

Back braces the rear axle today. Well at least cut and mocked it up. Not entirely sure how much actual added support it’s going to provide but at least it will look cool haha

 

[K223]

Those braces work good on 9” housings. Looks like this rear already has reinforcements going to the tubes. Nice!

 

[Oldfart]

Back braces the rear axle today. Well at least cut and mocked it up. Not entirely sure how much actual added support it’s going to provide but at least it will look cool haha

I'm not a mechanical engineer, but I'm thinking that your bungee cord support may not actually add very much extra strength. I would at least step up to a nylon tie.


.

 

[CoronaRaptor]

Should do the trick and keep that housing straight!

 

[K223]

Should do the trick and keep that housing straight!

Unlike you? **** had to do it.