Photo Album of my Raptor

[Robert McCleese]

http://photobucket.com/mccleeser-raptor

is for all the pics

JeepsandSigs's Channel - YouTube

Is for all the videos

 

[Tejas]

How many coats of Night Shades on the tail lights? Did you do it on the outside of the lens or did you disassemble the and spray it from the inside?

Looks good!

Tejas

 

[Robert McCleese]

i only did 2 coats of tint (exterior) but i put 5 or 6 coats of clear on top, i never opened the lenses before. how difficult are they to open and re-seal?

 

[Tejas]

i only did 2 coats of tint (exterior) but i put 5 or 6 coats of clear on top, i never opened the lenses before. how difficult are they to open and re-seal?

No idea, that's why I asked you haha!

Which clear coat did you use?

Tejas

 

[Robert McCleese]

i used
Rust-Oleum (Lens Tint) -Custom Shop-
Rust-Oleum (Acrylic Enamel) -Crystal Clear-

just a heads up, be patient, light coats and allow the coats to dry completely before applying another coat. Also make 100% sure the tint is fully dry before you clear it, because the clear will cause the tint to thin if it's not completely dry. my neighbor was a little impatient, and his ran a bit...

 

[NickPic83]

truck looks good. exhaust sounds nasty! need some fly by vids of it

 

[Robert McCleese]

i can do a few vids of drive by stuff, they are building a new road behind my house, so no people or kids, so maybe ill bring my little dude out and have him film me driving by, or actually "running it" all out...

 

[svt83]

That exhaust sounds sick! Did you do all the mods yourself or have a shop do it?

 

[Wilson]

I can't wait for my SW to be installed I'm going with cat delete and magnaflows mufflers I love that video but am hoping for a more deeper sound out of the magnaflows well see.

 

[Robert McCleese]

I am a do it myself kind guy, the only thing I will pay others for is when I re-gear the truck to a 4.56... But just a heads up, by no account were the headers an easy task; the driver’s side is fairly simple, but the passenger side required the engine to be lifted, but top to bottom it took 2 dudes (My neighbor and I) roughly 6-7 hours, I'm sure if we were to do it again, it would be faster, but the instructions that came with the kit were fair vague, and trial and error played a part of the amount of time...