Perch collars 1.5 vs 2.25

[Flash1034]

That’s called the Bro-Rake….

 

[Richard Hinsley]

That’s called the Bro-Rake….

I went with Geiser progressive springs and stock rear. It gives it a nice trophy truck stance.

 

[DocMarshall]

Some states are outlawing trucks with the 'Cali Lean'.

 

[matt_47_]

I went with Geiser progressive springs and stock rear. It gives it a nice trophy truck stance.

Any pictures of the trucks stance?

 

[RamseyF]

or also referred to as the "Carolina squat". North Carolina is outlawing it if its to high in the front. cant see cars and or pedestrians. if it was me id do 1.5's. 2.25 might be a bit much if you cary anything in the back regularly. these coils sag a little more than the leafs. I know I regularly have a couple hundred pounds in the back. I don't want the reverse squat whatsoever.

 

[Richard Hinsley]

or also referred to as the "Carolina squat". North Carolina is outlawing it if its to high in the front. cant see cars and or pedestrians. if it was me id do 1.5's. 2.25 might be a bit much if you cary anything in the back regularly. these coils sag a little more than the leafs. I know I regularly have a couple hundred pounds in the back. I don't want the reverse squat whatsoever.

It's not the Csrolina squat trust me. It almost looks level and when I eventually go to a Deaver setup it will be set in the front. Keeping it on stock (low perch) is better for higher speed handling. A lot better than a collar.

 

[Chiefapple]

I have the smaller collar now, but its level. Once I get this front winch kit on I'll see how much it settles. I have a set of RPG 3" collars that 1 won in a raffle. When I go to +3 deavers, I may go to the collars, or just go with geiser at that time.

 

[DocMarshall]

It's not the Csrolina squat trust me. It almost looks level and when I eventually go to a Deaver setup it will be set in the front. Keeping it on stock (low perch) is better for higher speed handling. A lot better than a collar.

Do Deavers even make springs for the rear of the Gen 3 yet?

 

[dirtlvr]

Do Deavers even make springs for the rear of the Gen 3 yet?

No, at least not yet. The only coils they make are fronts for old Jeep Cherokees. He is referencing a Gen 2 truck with leaf springs.

RPG has a spacer for the Gen 3 rear coil in the works.

 

[MookeyB37]

Just had 1.5” collars installed on mine. Sits perfect. Anymore and the front would sit noticeably higher