Painted skid plate

[butts182]

Looks good! Did you blend into the stock dark grey or mask a hard line?

Masked a hard line. Hard to tell tho.

 

[Charbert]

Can you post a pic or the brand of the rattle can spray you used from home depot. That is almost an exact match, wanting to do this myself. Also, did you prep the bumper in anyway? Or just cleaned it well before hand?

 

[BaseModelRaptor]

Can you post a pic or the brand of the rattle can spray you used from home depot. That is almost an exact match, wanting to do this myself. Also, did you prep the bumper in anyway? Or just cleaned it well before hand?

It’s pretty clear that it’s grey on top and black on bottom. It may look like a close match it pictures.

I just LineX’d the whole bumper and skid.

 

[butts182]

Can you post a pic or the brand of the rattle can spray you used from home depot. That is almost an exact match, wanting to do this myself. Also, did you prep the bumper in anyway? Or just cleaned it well before hand?

Rustoleum Truck Bed - black. It’s in one of my pictures on my driveway (see post #15). The color is very close. The color exactly matches the black pieces of the lower grille. I took off the lower grille, cleaned everything, lightly sanded everything, cleaned it again, including with prep, and sprayed it. I took the skid plate and oil filter cover off to paint them separately from the bumper. Also taped everything off.

 

[SeasickLI]

This thread gave me a nice Sunday project to tackle. I used Rustoleum black spray bed liner & matte black vinyl on top of the parking sensor centers.

 

[raptor730]

If your going to do the whole bumper just go get it wrapped. Will look perfect

 

[drecastro1]

 

[NH Bad Rap]

The grey is eye catching from the front but the black leans out the nose I feel.