P05B0 Active Air Shutter CEL after ADD bumper install

[Danactive]

I just installed my ADD bolt on front bumper and got the P05B0 Active Air Shutter code. i know you have to disconnect during install and then reconnect and zip tie out of the way once reinstalled due to the shutters being removed. curious if any others have had this pop up after install? it hasn't come back on yet but thought i would ask.

 

[Swaddict]

I never had a code when I installed my ADD

 

[Danactive]

I never had a code when I installed my ADD

And you did the same thing, remove shutters and disconnected the motor then reattached?

 

[Lucami]

Never had that with mine. I had a code for the intake sensor but it always a glitch I overrode with the cobb access

 

[Swaddict]

And you did the same thing, remove shutters and disconnected the motor then reattached?

all that was removed when I installed aftermarket intercooler, prior to bumper install

 

[ImAllSCREWdUp]

I had the same issue with Cobb FIC swap and Swarfworks hidden winch mount. The FIC came with a plug to cap the shudder harness connector but the code was still thrown. Got a CEL initially but cleared it with tuner. The shudder code is still active but the CEL does not come on.