Oxford White Gen 3 Pics please
- Thread starter slater
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Turbo_lander
Full Access Member
Great setup. I wish Eibach would hurry up with some HD springs so I can order my shell
@DMays Thanks man.
It's off-topic, but a quick question/comment since you brought it up: Has Eibach confirmed that they're releasing an HD spring? IIRC, I thought they bailed on them and were releasing lift springs only. That's the reason I decided to pull the trigger on the Geisers. I've been happy with them.
It's off-topic, but a quick question/comment since you brought it up: Has Eibach confirmed that they're releasing an HD spring? IIRC, I thought they bailed on them and were releasing lift springs only. That's the reason I decided to pull the trigger on the Geisers. I've been happy with them.
I am hopeful but haven’t seen anything that confirms they are. I’d happily get the Geiser’s but according to their website they don’t fit the 37pp trucks.
Geiser is making 37 springs now, they have a 37pp truck now and should be available soon
Nice! I hadn't looked at their site again until you just said that. Sounds like my next purchase. Thank you man
texasdr
Member
With the 2.25” rpg collar and stock rear, was it completely level or was the front higher or lower than the rear after install? I’ve seen the 2.25 on one truck and it looked like it still had a rake. I’m shooting for level or go 3” and have a trophy truck look.
Last edited:
yeah buddy. I texted Wyn Geiser a few nights ago. I still have his number from when I originally set up the group buys on the gen1 and gen2 for geiser springs
Tell him to sponsor a poor TN guy. I've got almost 40 followers on Instagram. Could be a very good partnership for him.
Similar threads
