Personally I have used Optimate chargers as that is what I just got used to a ways back and they have worked well for me. A while back I looked at using the MagCode port and clip, but was just too darn lazy to wire it up myself. Well I just happended to notice that Optimate came out with MagCode Port (O97P12) and Clip (O97C12) and decided to give them a try on the Raptor.
I considered a few places to mount the port with a goal of making it as easy as possible to connect....so picked this spot on the lower bumper. The three panels just pop off fairly easy.
It is a perfect fit and you have to go high so that the clip clears the plastic trim. There is room behind and it is a fairly easy cable run up to the battery. Note: this location redoes require customization of the cable to the battery, but that is fairly easy.
And not too obvious from any distance.
I considered a few places to mount the port with a goal of making it as easy as possible to connect....so picked this spot on the lower bumper. The three panels just pop off fairly easy.
It is a perfect fit and you have to go high so that the clip clears the plastic trim. There is room behind and it is a fairly easy cable run up to the battery. Note: this location redoes require customization of the cable to the battery, but that is fairly easy.
And not too obvious from any distance.
