I finally had the time to finish up my lights and bumper install. Bumper lights are the 40” Arc OnX6 and two 10” S8’s. The bumper and light install went very easy with the help of Nick @ Apollo Optics. My only snag that stumped me for a week after double checking everything was no power to the pair of S8’s. I had already checked that I had power from the upfitters, so the only thing I could think of was I pinched the wire installing the bumper. I had 3 of the bumper bolts removed before I unplugged the Y harness and noticed the wires from BD were pinned wrong. Swapped the black and white and everything was fine. This isn’t a jab at BD. Crap happens. I’m just putting it out there for people to double check everything if you think you have everything correct.
I’m amazed at the light output. I just need to adjust the 40” bar a little more. I love how this turned out. Now onto the pics.
Sent from my iPhone using Tapatalk Pro
I’m amazed at the light output. I just need to adjust the 40” bar a little more. I love how this turned out. Now onto the pics.
Sent from my iPhone using Tapatalk Pro
