Nick's review of Adam's Polishes

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
NickPic83

NickPic83

FRF Addict
Joined
Jan 31, 2012
Posts
9,639
Reaction score
2,442
Location
Rockland County NY
updated 1st post with


-Adams Liquid Paint Sealant- goes on and off easy. seems to last a while so far

-Adams- Glass sealant- i love this one. it last for months. its a little tricky to apply correctly but when its done it works great!
https://www.youtube.com/watch?v=q_NSEF_0gTM

-Adams Waterless Wash-this is a great one. its nice for in between washes. its a step further than the detail spray as far as cleaning but doesnt leave a shine like the detail spray. but like i said it can handle cleaning a dirtier surface without harming the paint, within reason of course. it has helped keep my vehicles clean with all the pollen we get during spring time.

-Adams Total Interior Detailer- i really like this stuff. it seems to clean well and leave a nice finish that isnt greasy at all. it kinda just gives it a deeper finish. it doesnt leave it looking wet just deeper and darker. very nice look and dry to the touch!

---------- Post added at 07:23 PM ---------- Previous post was at 07:12 PM ----------

also here is my wife's new ride after an all adams TLC time

car shampoo thru foam cannon
wool mit
bucket with grit gaurd
clay bar
super vrt
APC
TID
micro fiber cloths
great white drying towel
galss sealant
liquid paint sealant
brilliant glaze
buttery wax
flex vrg polisher

IMG_20140601_171426261_HDR_zpsfyw7htvr.jpg
IMG_20140601_171419514_zpsk6czfjz1.jpg
IMG_20140601_171134326_zpssrrjez18.jpg
IMG_20140601_171112981_zps0tn2dkzc.jpg
IMG_20140601_171108600_HDR_zpsjwrzja6h.jpg
IMG_20140601_171057741_HDR_zps9umkwjr9.jpg
IMG_20140601_170927027_HDR_zpsrtk1wxoo.jpg
IMG_20140601_170923153_HDR_zpstn3mhufr.jpg
 

TheWolf

Full Access Member
Joined
Nov 15, 2013
Posts
970
Reaction score
1,337
Location
Spokane, Washington
Good thread Nick. I wish I would have seen it sooner. I guess I did not look all the way back to last year when researching detailing and Adam's products.

I started using a foam cannon because it did not seem like I was getting enough shampoo on the truck when using the two-bucket wash method. I now use the foam cannon to get the shampoo on and then just a clean water bucket for rinsing the wash pad after each panel. I also do a good pre-rinse with the pressure washer first to get as much dust and dirt off before going to the foam cannon and shampoo.
 
OP
OP
NickPic83

NickPic83

FRF Addict
Joined
Jan 31, 2012
Posts
9,639
Reaction score
2,442
Location
Rockland County NY
Thanks wolf

I do the same. I pre rinse with a 40 degree tip, then foam cannon. The clean with the mit with more soap then rinse with the 40 degree tip again

Sent from my XT1080 using Tapatalk
 
Top