NGK Ruthenium plugs

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

PD1744

Full Access Member
Joined
Jan 21, 2020
Posts
294
Reaction score
605
Location
SC
I'm running them. I did a tune-up when I first bought the truck at the beginning of the year and threw a set of these in there. they seem fine to me. About 11 months and 14k miles of running them. No issues.
 

cabanche4

Member
Joined
Oct 8, 2022
Posts
26
Reaction score
5
Location
texas
I will be changing my spark plugs in the summer with the Ruthenium LTR6BHX-PSPE from Iridium LTR6IX I have now..
I always believe in getting the best whether it's over kill or not.
It's like running Hi-Test, you don't need to but the extra HP and fuel economy, keeping things in the combustion chamber, Cats and O2 sensors clean pays for it's self in the long run.
So if I don't need to change them as often and I get better performance how ever slight it might be, I'm good with it.

Also since I'm Supercharged the recommended gap is .28
And I've seen Tuners say .28 to .30 on a Tuned 6.2L will minimize misfire and and make it run smoother.

I just learned something about our dual spark plugs.
I always wondered why the spark plugs look different when pulling the old ones out. It's good reading.
Waste Spark Ignitions | NGK Spark Plugs
I installed as gapped from NGK .28. Hope that is good on a tuned 6.2L. Those plugs were fun to replace! Haha
 

1BAD454SSv2

FRF Addict
Joined
Jan 8, 2019
Posts
1,402
Reaction score
1,730
Location
HELL I ZONA
I run the Ruthenium's 1 step colder than stock on my Gen 2 93 stage 2 cobb . Work very well getting ready to change again in next few weeks . 15k miles on them . I had 2 sets of ruthenium stock heat range and sold them to my neighbors , for their Ecoboosts . I like the design of the ground strap unshrouded the center electrode .

1679574550809.png
 

jamesreds

Member
Joined
Jun 3, 2024
Posts
4
Reaction score
0
Location
Camas, WA
Question here, I’m putting in

NGK Ruthenium 1 Step Colder Spark Plugs HX LTR7BHX 95605 for my Gen2 Raptor, what is the recommended gap and torque specs??​

 
Top