New video of the fox 2.5 bump and National springs

[RPG]

Here is some video from the final day of testing. This is the setup you have all seen in the pictures this past week. This clip is filmed in about 12-16 inch whoops and around 65-85mph. Every thing went great and from what I've been told, as long as everything goes to plan, the release of the full kit will be on Friday after SEMA.
Fox 2.5 inch bump stops and National Leafs, Ford Raptor - YouTube

P.S. that annoying rattle you hear is a the exhaust, it has a bad hanger and rattles like hell in the dirt.

Enjoy, and fire away with questions if you have any

 

[Squatting Dog]

Very nice setup... Looks like the o ring was close to bottoming out.. What was the oil level and nitrogen pressure?

 

[RPG]

Standard pressure, 120psi or so. Thats one of the benefits to running a 2.5inch. If you need to up the psi you can, they can handle up to around 200psi. The kit has right around 1000 miles of testing on it, and only once has the zip tie hit the bottom. And the trucks have been driven harder than ever. Its crazy how much more planted the rear of the truck is now. Very little bucking allowing you to stay on the gas over holes you would have cringed on before...

Thanks for the kind words, the developer will be glad to hear it.

 

[Aaron]

Very nice, definitely interested in the info on this setup

 

[Squatting Dog]

That is great!

The speed looked like 70-80 mph at the end of the video. The nitrogen bump stops looked dialed in..

Still saw a little axle wrap, be hellva lot better than stock..

 

[RPG]

That is great!

The speed looked like 70-80 mph at the end of the video. The nitrogen bump stops looked dialed in..

Still saw a little axle wrap, be hellva lot better than stock..

Oh it is,

That same section use to be run around 50mph or so, and would send the ass end flying. What I love best about the kit is it still allows the shock to do its thing. The bump is only coming into play on extreme compression, and you will never hear it banging against the bump pad around town because its a 2.5 inch stroke vs 4 inch.

And the end was about 80mph. It was 3rd gear at 5/6k rpm

 

[GsxrRaptor]

Nice so are they avelible now and pricing I'm interested !!

 

[bstoner59]

Looking good!!

 

[Squatting Dog]

Im sold... I take it this kit will be available for 2012 Raptor?

 

[RPG]

Nice so are they avelible now and pricing I'm interested !!

I've been told Friday is when all that will be released. And from my understanding you guys and gals will not be be disappointed