New Key Fob Case!!

[screaminfast]

Hard no for me. Looks bigger than the OEM one, I don't see the point. It's like stabbing yourself in the eye for fun.

It’s maybe 1/8” taller but it is thinner. Feels good in the pocket.

 

[yoopercharged]

Thanks for sharing the assembly process. Looks sharp!

 

[screaminfast]

Some questions...does your new keyfob still work in terms of being detected to unlock doors by touch and start up the truck, or do you lose that?

Also, can you rearrange the button locations? Can you replace buttons with blanks, if you didn't want have an unlock button for some reason? Can you add buttons to control something other than truck, like unlike your house or something? Trying to find a reason why this could be useful.

You're just transferring the board over from the current one, so you're not changing any circuitry. You don't lose any functionality. It does come with blanks for the fobs that wouldn't have those buttons, but if you push the blank one it would still work as the buttons are on the circuit board itself.

 

[JohnyPython]

Looks cool but I just put a silicone c ondom on mine. Too lazy to do all that.

 

[melvimbe]

Looks cool but I just put a silicone c ondom on mine. Too lazy to do all that.

I have those for my two keys as well. I took them off one night, and the next morning there was now a third tiny little fob.

 

[isis]

Thinner and flatter probably does work better in a pocket. I hang mine from my beltloop like the dad that I am.

 

[nikhsub1]

Thanks for the side by side pic - before that it seemed like the new case was larger than the OEM. The main thing that i really dislike is that you essentially have to kill the OEM FOB to do this... I mean, if my fob was totally jacked up anyway, this could be a good idea. Until then...

 

[screaminfast]

Thanks for the side by side pic - before that it seemed like the new case was larger than the OEM. The main thing that i really dislike is that you essentially have to kill the OEM FOB to do this... I mean, if my fob was totally jacked up anyway, this could be a good idea. Until then...

For sure. That's why I grabbed an extra fob, so in the end for about $100, I have a 3rd fob and a cool case.

 

[Oldfart]

Looks cool but I just put a silicone c ondom on mine. Too lazy to do all that.

View attachment 380196

I did the same, it has held up really well for over a year now. The case still looks like new.

 

[NateMob]

AJT got his start with the Toyota 4x4 community and has really branched out with his offerings. I've had a few of his cases through the years and always enjoyed them. My last one was the cement gray color that looked great and i liked the slimmer but more industrial look.

Thanks for sharing.