New here. Stalling issue with my 2020?

[ghost410]

Hi everyone, I’m new here. Have had my 2020 for about three months and absolutely love it.

I had an interesting issue last night and wanted to see if anyone as experienced this before. Forgive me if this is long, but I want to be as detailed as possible to help diagnose this.

I parked the truck with the wheels turned and left it in 4H before turning it off. When I came back to the truck 8 hours later, I started it and put it in drive. When I put it in drive, the truck stalled. I then put it back in park, restarted it and it stalled again. It did this several times. Finally I started it and switched it back to 2wd and it stalled again. I began to roll in drive until I could straighten the wheels out. At this point I put it back into park and started it. When i did, the idle hung at 1500-1800rpm for a minute or so before settling down and I was able to drive home. There’s no CEL.

Has anyone experienced anything similar? Not sure where to even start with this.

 

[smurfslayer]

Never heard of this one.

 

[sixshooter_45]

Strange. Sorry but never heard of something like this before.

 

[Oldfart]

Are you driving it on the dry street in 4 high?

 

[Johnkn]

How exactly does a truck roll while in Drive with the engine off... interesting first post....

 

[Small Town Raptor]

Why are you driving in 4H? Perhaps the driveline is binding to the point where it's bogging down the engine causing it to stall.

 

[Swaddict]

Sharp incline?

 

[K223]

Interesting. So many things that could be causing this. Curious as well if your driving in 4H on road? Can’t see how a binding drive line would cause you to stall even when not in drive as the torque converter should allow for plenty of idle speed for the motor. Unless you have a TQ converter/tranny problem.

 

[ghost410]

Just to update; this occurred again and I’ve got a video this time. Just need to figure out how to post it

 

[ghost410]

How exactly does a truck roll while in Drive with the engine off... interesting first post....

I was able to get it into neutral to roll for the half of a second it was running