New Fog Lights need OPINIONS

[MDRAPTR]

So just bought a Set of Baja S2's from SPV PARTS and wanted to know where to Mount the Amber Lights? Should i have them on the outside mounting location or inside? I drive a lot of winding country roads.

**Side Note** I drive with Fogs on Constantly at night

 

[Space Ghost]

wide cornering (if thats their lens) i put on the outside, if theyre sport they shouldnt be too bad on all the time to other traffic if pointed somewhat down

 

[MDRAPTR]

wide cornering (if thats their lens) i put on the outside, if theyre sport they shouldnt be too bad on all the time to other traffic if pointed somewhat down

Awesome thanks Both Pairs are wide cornering so I was more asking in terms of Amber vs White?

 

[Space Ghost]

amber helps cuts through fog/rain/dust better than white, but white helps differentiate things better at distance, so not really a difference where you mount them if using the stock gen 3 locations. If the outer ones point out more to the side id say white on outside and amber on inside

 

[CACRaptor]

I have my white ones towards the outside and are always on. I have the amber set towards the inside and are wired to the Aux1 outfitter switch. I've had them that way for a while and like the look and function.

 

[MDRAPTR]

I have my white ones towards the outside and are always on. I have the amber set towards the inside and are wired to the Aux1 outfitter switch. I've had them that way for a while and like the look and function.

I think thats where Im headed. Use the Aux 1 when I need the Amber for Fog/Rain/Snow

 

[pnwobrigade]

I did the exact opposite. I have my wide cornering/yellow lense in place of factory fogs. The aux switch set are spot beam for further reach which I'd only run on backroads. I will say definitely aim the fogs some down, even with the wider cornering lenses there is a lot of light bleed upwards. The S2 Pro's are SIGNIFICANTLY brighter than OEM as in just with one pair of S2 Pros on it's easily 2x the output of the factory setups with all fogs and aux ones on.

 

[MDRAPTR]

I did the exact opposite. I have my wide cornering/yellow lense in place of factory fogs. The aux switch set are spot beam for further reach which I'd only run on backroads. I will say definitely aim the fogs some down, even with the wider cornering lenses there is a lot of light bleed upwards. The S2 Pro's are SIGNIFICANTLY brighter than OEM as in just with one pair of S2 Pros on it's easily 2x the output of the factory setups with all fogs and aux ones on.

View attachment 396750View attachment 396751View attachment 396752

Awesome…looking good.

 

[michael3283]

Post some pictures when you get them in! I'm looking to get the same lights on a rapid red.

 

[MDRAPTR]

Post some pictures when you get them in! I'm looking to get the same lights on a rapid red.

Will do.. will be in next 7-10 days w/ vaca & work trip