New: Baja Designs 7 XL Linkable Gen2 Raptor Kit Now Available

[4x4TruckLEDs.com]

The new Baja Designs XL Linkable Kit is now in stock here at 4x4TruckLEDs.com

We're the first dealer to get our hands on this kit and it's going to be a killer upgrade for the Gen2 Raptor.

A lot of folks have wanted a more aggressive system for their front bumper. The 40" OnX6 bars were popular but required drilling into your bumper and only gave you 1 pattern (unless you opted for the Dual Control Bar).

But now there is a bolt-on kit that gives you 7 lights!

The kit includes everything you need

• x3 XL Sport Spot LED Light
• x2 XL Sport Driving/Combo LED Light
• x2 XL Sport Wide Cornering LED Light
• x7 XL Sport Rock Guards
• Support kit
• Upfitter Harness
• Super Duty Brackets

This is their new XL Linkable system which let's you link the XL's together giving the entire setup a really SLICK look.

Available now on our site: http://www.4x4truckleds.com/baja-designs-ford-raptor-2017-7-xl-linkable-kit

MSRP is $1,749.95 - Sold on our site for $1,574.96 with FREE SHIPPING within the lower 48 US States.

 

[skiborsy]

Out of curiosity, why would one choose this over a 40" Onx6 for the same price with almost twice the lumens (other than price and ability to adjust angles)? Presumably one could use the SPP 40" no drill or another bracket to mount the BD light bar. Will there be a linkable XL Pro, XL Racer or XL80 setup or too cost prohibitive?

 

[4x4TruckLEDs.com]

1) You'd have to drill into your bumper to mount an OnX6 bar. Some folks don't want to do that
2) The OnX6 bar won't have the same patterns. These XL give you 3 sets of patterns
3) Some people like the look of 7 pods over the single bar
4) No relays needed. The 40" needs a relay and some folks don't want to deal with it
5) Personal preference

Everybody has different tastes/etc...

I'm not sure if Baja has plans for Pros, Racers or XL80s. I did ask about this and it comes down to pricing/amount of skus. If ya think about it, the footprint for all XL are the same so it's just a matter of putting the right circuit boards in. Perhaps one day they will.

 

[Mstgkillr]

So, 100% bolt on?

 

[Mstgkillr]

Can other BD lights work with this setup?

 

[4x4TruckLEDs.com]

So, 100% bolt on?

Yes 100% bolt on

Can other BD lights work with this setup?

No, this is the linkable system from Baja. The XL linkables have a different housing that let's the lights connect to each other and swivel.

 

[Chris retired grunt]

Have a question and forgive my ignorance about electric stuff, but 2 questions

1. Is there only 1 set of these lights that are rated for on road use and the rest are only off road?

2. How many up fitter switches have to be used for this set up?
I have a 2018 Screw 802A

thanks

 

[4x4TruckLEDs.com]

None of these lights are rated for on-road use. They are for off-road use only.

1 Upfitter switch, but i'll verify that within the hour to see if Baja changed it up a bit. But it's the XL Linkable so the idea is they "link" together.

 

[BigTomJR]

very cool I would get it in a heartbeat but just installed light bar

 

[4x4TruckLEDs.com]

This thing is pretty badass looking, not gonna lie.

This is how it comes out of the box

It will connect to a single upfitter (either Switch 1 or Switch 2, as it draws 14amps total)