Need help with Fuel Trophy size

[boosting1bar]

I'm going to order a set of Fuel Trophy's today (hopefully) to use with my stock tires and I'm trying to retain as close as possible to stock stance (don't want to deal with rubbing, etc). I have the faux beadlock wheels from Ford on my truck currently and I think the Trophys I want are the D55217858345 but I've looked at so many different wheels and part numbers and offsets and backspaces the past 2 days I've completely confused myself lol! If one of you guys could help a little I'd really appreciate it.

 

[KaiserM715]

This would be a good place to start:
http://www.fordraptorforum.com/f25/new-wheels-tires-finally-truck-fuel-trophys-toyo-mts-36787/

A quick search pulled up several other threads on these wheels.

 

[Double Tap]

You want the 17x8, 6x135 bolt pattern and "6" offset. My D551's were the #D55117858950 wheel. You want the D552 version of that.

 

[boosting1bar]

This would be a good place to start:
http://www.fordraptorforum.com/f25/new-wheels-tires-finally-truck-fuel-trophys-toyo-mts-36787/

A quick search pulled up several other threads on these wheels.

I have searched quite a bit, the thread you linked is for a different size wheel which doesn't really help. The threads about the 17" wheels also have conflicting info in most of them.

 

[marioec]

17" Fuel trophy's on stock tire


tem specifics:

Manufacturer Part Number:
D55117858950

Rim Width: 8.5 Surface Finish: Matte Black/Anthracite
Bolt Pattern: 6x135 Warranty: Yes
Offset: +6mm Brand:
Fuel
Backspacing: 5" Style: Trophy
Finish: Matte Black/Anthracite Rim Diameter: 17
Hub Bore: 87.1mm Size: 17x8.5

 

[FP Forged]

The part number you have listed is wrong and is for 6x5.5 and you need 6x135. The 6x135 ONLY comes in a +6 and with 35's you will not rub

Here are the specs and part numbers
D552 SPECS

And here is my truck with the exact wheels you want (no rubbing)
http://www.fordraptorforum.com/f25/fuel-trophy-custom-caps-new-toyo-r-ts-37633/

 

[boosting1bar]

Thanks guys!

 

[FP Forged]

Thanks guys!

Don't forget the flush mount billet aluminum caps Your Trophy's aren't complete without them. New group buy is now open.

http://www.fordraptorforum.com/f29/fuel-trophy-anza-flush-mount-cap-group-buy-37911/

 

[boosting1bar]

Don't forget the flush mount billet aluminum caps Your Trophy's aren't complete without them. New group buy is now open.

I was hoping these would be available again. I'm in!

 

[str8fast]

I have those exact wheels and 35" toyos mt I made pretty bad contact on my driver fender cracked in two spots and shoved up about 3/4" so yah they rub hahaha knocked both fender liners out as well . I was running pretty hard at the dunes and most the damage was done when I overcleared my landing and bottomed front and rear suspension. Out.

---------- Post added at 02:58 PM ---------- Previous post was at 02:57 PM ----------

Oh yah and I'm on top perch