More info please

[onesickpuppy]

There is an Outlaw raptor on the website with fromt bump stops and I would like to hear any information on the install. Looks to be weld on. I have seen another thread where an added shock along with the factory 2.5 Fox and has the bump stop shown and had the factory LCA. I did not see that any reinforcemant or wear pad was added to the LCA. Any information on this is appreciated....
OSP

 

[Outlaw Offroad]

Can you send me a link to the exact one? Thanks

 

[onesickpuppy]

It looked much like this, I will hunt for the actual close up picture of the one....

 

[onesickpuppy]

This may not be an Outlaw now that I look at it, but could it be??? Bolt on or weld.... Feel free to PM if you want it off the record!! LOL

 

[Maxx2893]

That's a Baker UCA, I'd guess he made the whole set up.

 

[Outlaw Offroad]

That truck has our Long Travel Kit on it. We do the front bumpstops for the long travel kits only. They are Weld on.

 

[bstoner59]

That pic you have is all Baker. Start with any set of 3.0's and you will be much better off than the setup in that pic.

 

[onesickpuppy]

Thanks for the come backs guys, that is the feed back I kind of needed. Was tryin to advert 3.0's, but.....
The bump looked to be too far towards the pivot of the arm to be really effective for dampening without making it stiff as hell. not sure where you could put one that would be more outboard....
Thanks again....