MFT and iPhone 5, caller can't hear me talking

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

HollicaSnooze

Member
Joined
Aug 25, 2012
Posts
2
Reaction score
0
anyone having this problem? Truck was built 12/12/'12 so it has the latest software (v3.5.1). Worked fine for first 18 days or so, then this started. Did a Master Reset, no go. Rebooted my phone, no go. Took it to the dealer, they tried for 30-45 minutes, no go.

I drove it home, disconnected my battery for 20 minutes, that fixed it for a few calls. I have an appt back at my dealer this week for a complete reload of the software (2 hours?).

Any thoughts or experience with this?
 

Perauto

Full Access Member
Joined
Jul 28, 2012
Posts
249
Reaction score
172
Location
Richmond ,va
Mine seems to work fine with Iphone 5,occasionally it does not follow thu with dialing the number once it has been repeated.
 

Richie_chi

Full Access Member
Joined
Sep 1, 2012
Posts
175
Reaction score
29
Mine will sometimes connect funky, won't be able to do calls or play music over Bluetooth. It'll show the song playing on the MFT screen and I can still control my phone but sound will only play thru my iPhone 5. The little tab for audio that's usually there to choose between playing thru phone or bluetooth isn't there either, if I shut the truck off and restart it, it works fine.
 
OP
OP
H

HollicaSnooze

Member
Joined
Aug 25, 2012
Posts
2
Reaction score
0
Update, they changed out my APIM (Accessory Protocol Interface Module....say that 3 times fast) for the Sync system...Ford shipped it via slow boat so it took
2 weeks, almost...works fine now, go figure
 
Top