I have a truxedo soft roll-up style tonneau on my Raptor w/ the rails that attach to the bed sides, not my fav setup or first choice but was part of the deal I worked on the truck when new they threw in a tonneau cover but was whatever they had in stock. It’s good quality, doesn’t flap a lot making noise & has a good tight fit, when rolled up pretty much full access to the bed, doesn’t weigh much, but I never like the tonneau covers that use those rails because you’ll forever have to be mindful not to let something heavy/rugged lean or slam up against them, you can’t really sit or lean on the bed sides w/ them attached etc.
I had a bakflip type tonneau before- gator brand I think but they’re all similar - for the money the quality isn’t that great IMO, the flip style one I had also had the weather seal gaskets start pulling away & the composite AL panels got water sandwiched in between & swelled, plus I’m sure it isn’t water tight.
Between my dads trucks growing up & my own had quite a few tonneaus & my fav hands down for combo of bed access, security, ease of removal, quality/durability & price is the Advantage Hardhat Tri-fold. It folds on itself allowing access to 2/3 bed, but you can easily remove it entirely for full bed access, just uses adjustable nylon/plastic crank downs @ 4 corners, when its warm you can get these adjusted so the whole thing is super tight & I had this same tonneau on another truck that got totaled & I had to use a sawzall to cut through the panels to remove it to gain access, I tried using a crowbar to pry it off but it wouldn’t break! since the tailgate was locked & couldn’t open due to damage from the accident- so in other words it’s Pretty damn secure & rugged & w/ AL frame & hard nylon plastic inserts under the soft vinyl you can put stuff on top of the cover w/o sagging or damaging it- like up to 40-50 lbs I’d say. It’s 100% waterproof.
Look- on sale too-
https://realtruck.com/p/advantage-h...MI18KssJrd5QIVBOiGCh2tEQaNEAQYASABEgKQJvD_BwE