lee power steering pump

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

alex zopp

Member
Joined
Feb 8, 2020
Posts
33
Reaction score
9
Location
haydental (north italy)
hello guys

I'm writing again about my raptor power steering pump that keeps making noise ( new pump ecc). I bleeded the system correctly ( vaccum pump ecc), I mounted the rpg reseivor but still creaks...

has anyone used the lee performance pump? is a good product and does anyone know if it can fix the noise?

I want to solve the problem haha

thanks guys
 

Brad12

Full Access Member
Joined
Apr 9, 2018
Posts
96
Reaction score
104
Location
Bay Area
I also have the Lee system on my truck and it's been awesome. I've put it through many multi-day trips through the desert, Baja, etc. and it's held up great. I would recommend it.
 

PorterW1111

FRF Addict
Joined
Apr 19, 2020
Posts
1,456
Reaction score
2,063
Location
Florida
In my opinion you could preface the pump with ford oem 10 times over before matching the cost of the Lee. I know you said you bled it correct with the vacuum pump but all I did was jack up the front end motor off and turn the wheel lock to lock to flush out the old fluid, replaced the pump, filled it up, turn the wheel to fluid comes out the lines, secure lines fill and turn wheel lock to lock until fluid is at the correct level.


Have had zero issues since. What bleeding process are you using are you potentially running a dry pump during the process?
 
OP
OP
alex zopp

alex zopp

Member
Joined
Feb 8, 2020
Posts
33
Reaction score
9
Location
haydental (north italy)
In my opinion you could preface the pump with ford oem 10 times over before matching the cost of the Lee. I know you said you bled it correct with the vacuum pump but all I did was jack up the front end motor off and turn the wheel lock to lock to flush out the old fluid, replaced the pump, filled it up, turn the wheel to fluid comes out the lines, secure lines fill and turn wheel lock to lock until fluid is at the correct level.


Have had zero issues since. What bleeding process are you using are you potentially running a dry pump during the process?

yes I bleeded the system with the front tires raised off the ground, and at the start with the motor off. i followed the process indicated by ford
 

PorterW1111

FRF Addict
Joined
Apr 19, 2020
Posts
1,456
Reaction score
2,063
Location
Florida
yes I bleeded the system with the front tires raised off the ground, and at the start with the motor off. i followed the process indicated by ford
Something seems off then for sure. I did the ps pump the exact way you did and have zero noise out of mine. You are using atf right?
 
Top