yep. thats wired in series
Kicker Sub upgrade
- Thread starter Rappy
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Toadster
FRF Addict
Ended up ordering the
May as well get 50% more wattage
KICKER CompRT 8"(20cm) Subwoofer, DVC, 4-ohm
May as well get 50% more wattage
Toadster
FRF Addict
ok got the new Kicker sub, I'm assuming everyone had to open up the sub box opening, or did you guys use an mdf spacer?
Toadster
FRF Addict
Installed it today
Used a 3D printed spacer since the sub wouldn’t fit the stock opening
Wired this 4 ohm DVC in parallel so I’d get the 300w from the amp
Plenty of space between the sub and the seat
The sound output is less than the OEM setup - what could be wrong? Getting sound - but routing through the original amp wires to the new amp
Used a 3D printed spacer since the sub wouldn’t fit the stock opening
Wired this 4 ohm DVC in parallel so I’d get the 300w from the amp
Plenty of space between the sub and the seat
The sound output is less than the OEM setup - what could be wrong? Getting sound - but routing through the original amp wires to the new amp
Toadster
FRF Addict
I stripped the other end and used these wire to RCA adapters
might be out of phase. double check the inputs and outputs
Toadster
FRF Addict
from the wiring diagram here's how I setup
the outs were pretty simple from the AMP
(+) went to my red wire
(-) went to my black wire
wired like this:
give me a call or text. (831) 254-7562
Toadster
FRF Addict
Thanks again!!!!
no problem. thats what im here for
Similar threads
