Installed Foutz Motorsports Rear Coil Spacers!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SuperSafety

Active Member
Joined
Sep 13, 2020
Posts
57
Reaction score
69
Location
Houston,TX
Truck looks bad*ss! Your pics had me nervous, as I went with the 2.25 and 1 setup when I ordered everything. I thought the 1" in rear would give me a big rake. Post #60 makes me think I'll be just right. Once I have it all installed, I'll put up measurements and pics.

What does the camper you tow weigh? I'm skeptical on towing capacity. Gen 2 flashbacks. Lol
 

MarkG

Active Member
Joined
Feb 27, 2019
Posts
56
Reaction score
70
Location
SoCal805
Truck looks bad*ss! Your pics had me nervous, as I went with the 2.25 and 1 setup when I ordered everything. I thought the 1" in rear would give me a big rake. Post #60 makes me think I'll be just right. Once I have it all installed, I'll put up measurements and pics.

What does the camper you tow weigh? I'm skeptical on towing capacity. Gen 2 flashbacks. Lol
What did you tow/haul in your Gen 2 as I have a Gen 2 and looking to tow the OP’s same toy hauler with RZR Pro XP 2 seater. I have Eibach up front and Icon springs in the rear and know this set up will put me over my GVWR limits.
 

SuperSafety

Active Member
Joined
Sep 13, 2020
Posts
57
Reaction score
69
Location
Houston,TX
What did you tow/haul in your Gen 2 as I have a Gen 2 and looking to tow the OP’s same toy hauler with RZR Pro XP 2 seater. I have Eibach up front and Icon springs in the rear and know this set up will put me over my GVWR limits.
I had a ‘19 with the icon rears and geisers. Towed a small trailer for landscaping when I did our yard. Mulch and a few bricks. Didn’t have the warm fuzzies after.
 

Attachments

  • 989A11F3-53AB-4B31-9AB2-0AAC266291D9.jpeg
    989A11F3-53AB-4B31-9AB2-0AAC266291D9.jpeg
    246.5 KB · Views: 40

scsponger31

Active Member
Joined
Dec 6, 2020
Posts
52
Reaction score
25
Location
Boise/Socal
Resurrecting this thread. I have had Icon Collars on my truck since new and it always sat a little nose high. Just installed the spacers and the truck looks and feels so much better.

With that said, when we dropped the truck down the spacers settled a little and you can spin the nuts/bolts, that come with the kit, and that hold the spacers in place. I honestly cannot see how that matters now that everything is in but wanted to appeal to those smarter than me to see if I am wrong.

FWIW the truck does see a lot of time off road.
 
Top