Installed Foutz Motorsports Rear Coil Spacers!

[catinthehat85]

That’s good to know. I would prob went with that. I couldn’t find it on their website.

It’s there buddy, costs a little more though since it’s adjustable.

 

[Wizo]

View attachment 347746
This is 2.25” RPG up front and 3/4” Foutz in the rear. And I’ve done thousands of miles towing between 6k and 10k lbs and the rear still is holding strong a bit higher then the rear.

Man that looks spot on!! The shop I am at is doing the same thing for new and glad to see the finish product!

 

[Kotykb]

Man that looks spot on!! The shop I am at is doing the same thing for new and glad to see the finish product!

Are you keeping the OEM 37" wheels?

 

[Wizo]

No - I went with a larger wheel and wider tire set up.

 

[SVT N8]

Any tips for the rear install? My 1” Foutz are going on tomorrow. 2” front is already done.

 

[Rengastarr]

Any tips for the rear install? My 1” Foutz are going on tomorrow. 2” front is already done.

It's actually super straight forward. They fit up in the bucket, and they're reversible so work on either side.

 

[DaddyHelm]

Do you notice a ride difference/sluggishness with the fact that the trail grapplers are 20lbs a tire more heavy than the K02's? What about the ride with the collars installed? Better/worse? Truck looks awesome! Any rubbing under full flex/max turning?

 

[blue22raptor]

I just finished installing the 1” rear spacers. I jacked up the rear axle, on one side, to get the wheel off. Then, jacked up as high as my jack would go. Placed a stand under the rear part of the main frame rail. Used spring compressors, just to hold the spring from expanding, then dropped the axel down. Did not have to remove the shock bolt or anything else. Popped the spring out, installed the spacer and jacked it back up, making sure that the spring sat correctly. Then I loosened/removed my compressors and removed the stand. I then lowered the axel enough to install the rear tire. It was pretty simple. Took about 20 minutes per side once I figured out this game plan!

 

[DRL1865]

Nice set up. I did the 2.25” collars on mine and nothing to the rear and it looks perfect to me. Thanks for the post.

 

[Mc5601]

I just had Eibach springs installed up front along with a 1” Foutz rear coil spacer. Now sitting dead level at 42.5” all the way around