Installed Foutz Motorsports Rear Coil Spacers!

[SouthernRap]

I didn’t measure, but it’s just a spacer that moves the upper spring mount location down 3/4”. I do not think it’s affects any other geometries, but not sure. Sorry didn’t think to do the B&A measurements! I have the 2.25” RPG collar, and I’m definitely still higher in the front. I’d say you’ll be looking pretty good with the 1.5”!

Awesome! Thanks for reply!

 

[Floyd554]

Can u do some measurements on yours? I’m really not into the dead on “leveled” look. I prefer a little rake to prevent it from looking squatted. That’s just my opinion…..to each their own. Some people like skinny chicks, some like fatties…..I’m not judging. Lol. Anyways, I’m thinking about the 2” Foutz collars with the 1” rear spacer. I keep reading this thread over and over hoping to get the look I want. I appreciate you posting this.

 

[THOODLA]

I didn’t measure, but it’s just a spacer that moves the upper spring mount location down 3/4”. I do not think it’s affects any other geometries, but not sure. Sorry didn’t think to do the B&A measurements! I have the 2.25” RPG collar, and I’m definitely still higher in the front. I’d say you’ll be looking pretty good with the 1.5”!

What wheels do you have ?

 

[Rengastarr]

What wheels do you have ?

They’re forged Innov8 Racing wheels. 17x8.5 +6mm offset. Satin black center, gloss black Tech-lite ring, with 12-point Stainless ARP fasteners and flush billet center cap.

Innov8 Racing High quality American Made Forged Racing Wheels

High quality forged wheels | Innov8 Racing inc | United States

www.innov8racing.com

 

[Kotykb]

I have a Raptor 37" incoming, to get a perfectly level look should I go with a Foutz 1.5” up front and a .75” for the rear?

2021 - UP Raptor front leveling kit - 2 inch or 1.5 inch lift

This is the best way to add more ride height to the front without changing all of the geometry , here's why this leveling kit is the best on the market You Can Customize Your Lifted Look: select your lift collar sizes with 1.5” or 2” to get the front height to be exactly what you want it to...

www.foutzmotorsports.com

2021 - up Raptor Rear Spring 3/4" Spacer Lift Kit - by Foutz Motorsports

Add ride height to the rear of your new Gen 3 Raptor. Our rear spring spacer kit allows you to add 3/4" of height with a simple upper plate kit in the stock spring bucket. This kit is easily installed above the stock spring and will raise the truck up about 3/4 " Since the plates go directly...

www.foutzmotorsports.com

 

[catinthehat85]

I have a Raptor 37" incoming, to get a perfectly level look should I go with a Foutz 1.5” up front and a .75” for the rear?

Or you could also just do RPG 1" up front.

 

[SouthernRap]

I don’t think RPG offers a 1”

 

[Rengastarr]

I have a Raptor 37" incoming, to get a perfectly level look should I go with a Foutz 1.5” up front and a .75” for the rear?

2021 - UP Raptor front leveling kit - 2 inch or 1.5 inch lift

This is the best way to add more ride height to the front without changing all of the geometry , here's why this leveling kit is the best on the market You Can Customize Your Lifted Look: select your lift collar sizes with 1.5” or 2” to get the front height to be exactly what you want it to...

www.foutzmotorsports.com

2021 - up Raptor Rear Spring 3/4" Spacer Lift Kit - by Foutz Motorsports

Add ride height to the rear of your new Gen 3 Raptor. Our rear spring spacer kit allows you to add 3/4" of height with a simple upper plate kit in the stock spring bucket. This kit is easily installed above the stock spring and will raise the truck up about 3/4 " Since the plates go directly...

www.foutzmotorsports.com

This is 2.25” RPG up front and 3/4” Foutz in the rear. And I’ve done thousands of miles towing between 6k and 10k lbs and the rear still is holding strong a bit higher then the rear.

 

[catinthehat85]

I don’t think RPG offers a 1”

They do.

 

[SouthernRap]

They do.

That’s good to know. I would prob went with that. I couldn’t find it on their website.